Quick fix for HC ?
#1
Full Member
Thread Starter
Join Date: Oct 2003
Location: Scottsdale, Arizona
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Quick fix for HC ?
I am failing smog. HC is 4% high. Any quick fixes to lower the HC. I am using alcohol already. Leaned out the mixture. CO is good. It's failing on the hard acceleration part. What will give me a little less HC ? New plugs ? Hotter plugs ?
#2
RX-7 Bad Ass
iTrader: (55)
High HC is typically a problem with the cat or airpump. I see "$20 Ebay cat" in your sig - what's up with that?
Dale
Dale
#3
Do you have the ability to change the timing; ie standalone ECU?
1 step up in heat range could also give you a little bit of an edge.
As Dale said what cat are you running? I've had success with customers using just a 3" in/out autozone unit just for passing emissions. There are also other things you can do to cheat.....
I have access to emission testing equipment for a pretest if you want. Just shoot me a PM...
1 step up in heat range could also give you a little bit of an edge.
As Dale said what cat are you running? I've had success with customers using just a 3" in/out autozone unit just for passing emissions. There are also other things you can do to cheat.....
I have access to emission testing equipment for a pretest if you want. Just shoot me a PM...
#4
Banned. I got OWNED!!!
Originally Posted by DaleClark
High HC is typically a problem with the cat or airpump. I see "$20 Ebay cat" in your sig - what's up with that?
Dale
Dale
#6
Banned. I got OWNED!!!
Join Date: Jul 2004
Location: next to the polishing wheel!!!
Posts: 1,179
Likes: 0
Received 1 Like
on
1 Post
Try this , find the stop screw to the secondary throttle plate and unlock the 8 mm nut .Now screw the screw in to open the plate alittle .Tighten the nut to hold it .This will lean the mixture out because the TPS is not knowing the extra are is there .On mine with 850 and 1680 injectors .I retard the timing on the PFC and reduce the duty cycle on the injectors ,run a stock cat . This will fail at 1200 to 1400 parts per mil. When I adjust the secondary plates open , it will pass at 60 to 80 parts per mil .
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM