question on buying a wideband o2
#1
Full Member
Thread Starter
Join Date: Sep 2003
Location: Pittsburgh, PA
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
question on buying a wideband o2
I'm putting a wideband in my down pipe while i'm getting the turbos rebuilt. The question is do i need a entire wideband kit or can i just get the lambda probe? I HAVE DATALOGIT with my apexi ecu
#2
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
You'll need a sensor,a controller, and a connectivity kit between the controller and the datalogit box. You don't need a display, unless you want one.
Check out the TechEdge 2.0.
Also, sensor location is very important. You'll get the best results by placing the bung in the pipe after it's flattened out to join the main cat/midpipe. It also needs to be within 15 degrees of vertical to protect the sensor.
Check out the TechEdge 2.0.
Also, sensor location is very important. You'll get the best results by placing the bung in the pipe after it's flattened out to join the main cat/midpipe. It also needs to be within 15 degrees of vertical to protect the sensor.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM