question about Pettit AST.
01-30-02, 11:37 PM
#1
Full Member
Thread Starter
Join Date: Jan 2002
Location: San Diego
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
question about Pettit AST.
Hi all, I am relatively new but just humor me.
I bought a Pettit AST and it came with a stant 13lb. cap. Now I know that higher pressure is good for boiling point, but that sure is alot more than my stock cap. I know the stock (or recall cap) is low for the AST cracking problem, but I have a stock plastic radiator and don't want to split it or anything because my cap was too high.
Should I run it or get a lower lb. cap?
Thanks everyone.
Ryan
I bought a Pettit AST and it came with a stant 13lb. cap. Now I know that higher pressure is good for boiling point, but that sure is alot more than my stock cap. I know the stock (or recall cap) is low for the AST cracking problem, but I have a stock plastic radiator and don't want to split it or anything because my cap was too high.
Should I run it or get a lower lb. cap?
Thanks everyone.
Ryan
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
msilvia
3rd Generation Specific (1993-2002)
15
09-11-15 12:13 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM
