hey guys...I'm reinstalling my AC and am down to just 2 lines left. I need to know which line goes to the compressor out of the lines that come out of the tank. Is it the line in the middle with the clear part above it or is it the line that is off to the side a bit. thanks

 

I know this is an odd question but can somebody please take a look for me. Thanks

 

high pressue low pressure, reciever drier, condenser, i have no idea what you are talking about

 

There are two lines that go to the compressor. One of these comes along the intercooler support bar. The other line goes to the drier. The drier is the cylinder part located at the corner of the engine bay by the battery. I think this is what you mean by tank.

The drier line is a two piece line with a sensor attached to it, near the stock battery location. The other line from the drier goes down to the condenser.

If you have the system setup stock, there really aren't any other ways to attach the lines to the proper components.

I think I am missing one other line that goes to the condenser, but I can't remember.

 

ok...yes I meant drier by tank...sorry about that. My setup is not even close to stock...I have the lines all changed. OK my question is about the line that goes from the drier to the compressor...is it the line in the middle of the drier with the clear top or the one off to the side? thanks

 

^