3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Pulley belt

Thread Tools
 
Search this Thread
 
Old 08-04-02, 10:00 AM
  #1  
The Ricer Eliminator

Thread Starter
 
Jim Calandrella's Avatar
 
Join Date: Aug 2002
Location: Boston
Posts: 647
Likes: 0
Received 1 Like on 1 Post
Pulley belt

I know this is a silly question to those that work on their own cars, but please bear with me.
I'm trying to change my air pump, which really doesn't seem that hard, but one thing is stumping me.
How do you get the belt off?
Be easy now.
Thanks
Old 08-04-02, 10:59 AM
  #2  
HARRRRRRRRR

 
ttpowerd's Avatar
 
Join Date: Jan 2002
Location: Marietta GA
Posts: 1,858
Likes: 0
Received 0 Likes on 0 Posts
There is a 12mm bolt under the airpump and another one above it. You want to loosen the one above the airpump and then loosen the one underneath. Afterwards you want to push the airpump downward as far as it will go. This gives the belt some slack and you just pull it off the pulley. Then you remove the bottom bolt, the top bolt and pull that air pump off Hope this helps.

Last edited by ttpowerd; 08-04-02 at 11:02 AM.
Old 08-05-02, 03:40 PM
  #3  
The Ricer Eliminator

Thread Starter
 
Jim Calandrella's Avatar
 
Join Date: Aug 2002
Location: Boston
Posts: 647
Likes: 0
Received 1 Like on 1 Post
ttpowerd,
I can't remember if I thanked you. So thanks for your help.
Jim
Old 08-05-02, 10:58 PM
  #5  
Rotary Freak

 
duboisr's Avatar
 
Join Date: Jan 2002
Location: Nashville Tn
Posts: 2,171
Likes: 0
Received 1 Like on 1 Post
Some times you must lossen both alt and the air pump
Old 08-06-02, 01:01 AM
  #6  
Banned. I got OWNED!!!
 
I Killed Tupac's Avatar
 
Join Date: Jun 2002
Location: Boise ID
Posts: 97
Likes: 0
Received 1 Like on 1 Post
and its really easy so dont be a dumbass like i was and pay a shop $400 to do it
Old 08-06-02, 09:54 AM
  #7  
The Ricer Eliminator

Thread Starter
 
Jim Calandrella's Avatar
 
Join Date: Aug 2002
Location: Boston
Posts: 647
Likes: 0
Received 1 Like on 1 Post
Well, I am a dumbass, but I managed to get my new air pump and belt on last night.
Thanks for your help.
Jim
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
Robrods64
New Member RX-7 Technical
6
10-02-15 07:56 PM
Turblown
Single Turbo RX-7's
1
09-30-15 05:58 PM



Quick Reply: Pulley belt



All times are GMT -5. The time now is 02:13 AM.