for profec b spec 2 users
#1
for profec b spec 2 users
I'm running non seq. stock twins and want to run 15lbs on the high setting... I cant get it to go to 15. it goes to 10, then slowly creeps up.. Can someone on here tell me your setting so i can have something to work with..
#4
Senior Member
Join Date: May 2001
Location: S.F. Bay Area, CA
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
I tried to start a database for profec B settings. There are a few replies. Hope this helps..
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/greddy-profec-b-spec-ii-survey-449045/
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/greddy-profec-b-spec-ii-survey-449045/
#5
Senior Member
Join Date: May 2001
Location: S.F. Bay Area, CA
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
First off,. you should start by listing your settings. If your boost slowly rises as your rpm increases, you may want to raise your gain. You also want to raise your gain if your boost falls as your rpm's rise. The closer your gain is to your set setting, the faster the spool up. If you start spiking, then you should lower your gain until spiking stops.
Last edited by overkill; 11-30-05 at 06:40 PM.
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM