Problems with taking boost gauge out
#1
Junior Member
Thread Starter
Join Date: Oct 2008
Location: sydney
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Problems with taking boost gauge out
Hey guys,
would love to get some feedback on this issue:
I took out an aftermarket boost gauge which was faulty.
Now there is one nipple on the throttle body (i think), that isnt attached to anything which you can feel air being pushed out of.
Where should that connect to considering its going back to stock?
Thanks heaps in advance
would love to get some feedback on this issue:
I took out an aftermarket boost gauge which was faulty.
Now there is one nipple on the throttle body (i think), that isnt attached to anything which you can feel air being pushed out of.
Where should that connect to considering its going back to stock?
Thanks heaps in advance
#2
Cheap Bastard
iTrader: (2)
Many people hook up a boost gauge to the nipple on the passenger side of the upper intake manifold. It's a large aluminum part on top of the engine that curves downward. If that is where your nipple it, just cap it off. In fact, you can probably just cap it off no matter where it is.