Pressure Regulator?
#1
Team Benjos Captain
Thread Starter
iTrader: (2)
Join Date: Aug 2005
Location: Greenwood/Hartsville, SC.
Posts: 2,720
Likes: 0
Received 1 Like
on
1 Post
Pressure Regulator?
I read somewhere around here that someone was running a pressure regulator setup on 10psi to alieviate their bost not coming on after a hard first gear pull. Does anyway know anything about that? I can't remember where the regulator was supposed to go and I also don't know what kind of regulator to get.
#2
RX-7 Bad Ass
iTrader: (55)
Uh, you mean a boost controller?
If you're not holding 10psi, either you have a check valve problem or a sticky solenoid. Dave Disney documented that some solenoids can stick when running a lot of boost (like 14psi) and I've seen people using methods to drop the amount of boost the solenoids see.
Here's Dave's page on solenoid testing with more info -
http://rx7.voodoobox.net/howto/solen...oid_check.html
Dale
If you're not holding 10psi, either you have a check valve problem or a sticky solenoid. Dave Disney documented that some solenoids can stick when running a lot of boost (like 14psi) and I've seen people using methods to drop the amount of boost the solenoids see.
Here's Dave's page on solenoid testing with more info -
http://rx7.voodoobox.net/howto/solen...oid_check.html
Dale
#3
Team Benjos Captain
Thread Starter
iTrader: (2)
Join Date: Aug 2005
Location: Greenwood/Hartsville, SC.
Posts: 2,720
Likes: 0
Received 1 Like
on
1 Post
No, it was more along the lines of if the solenoids see more than 12, then they stick. The regulator was used, I think, before the vacuum chamber so that they never saw more than 10. I'm wondering if that's what's wrong with mine at the moment.
#4
Team Benjos Captain
Thread Starter
iTrader: (2)
Join Date: Aug 2005
Location: Greenwood/Hartsville, SC.
Posts: 2,720
Likes: 0
Received 1 Like
on
1 Post
Dale, I should've read further into what you linked me to. That is EXACTLY what is happening here. Thanks for that link, I'm going to try to find another TC solenoid now.
Thread
Thread Starter
Forum
Replies
Last Post