Post Your MPH at the 1/8th Mile Mark
Thread Starter
Joined: Mar 2001
Posts: 1,778
Likes: 1
From: ROSEVILLE, MN
Post Your MPH at the 1/8th Mile Mark
Find a place to measure off 660 feet. Do a run and mark down the MPH after 660 feet(1/8 mile).
Stock FD should be about 75mph.
Single turbo guys(400rwhp) should be at about 100mph.
If you get a run of more than 100mph I really want to see your mods listed.
Ken
Stock FD should be about 75mph.
Single turbo guys(400rwhp) should be at about 100mph.
If you get a run of more than 100mph I really want to see your mods listed.
Ken
I ran 8.00 @ 90 with drag radials at the track, that was with a 1.89 60 foot time
intake, full exhaust, base map PFC 12.5 psi of boost. Pretty much everything else was stock all the way down to the clutch. Oh yea, I had a short throw shifter and a under drive pulley, neither of which really mattered.
Later,
intake, full exhaust, base map PFC 12.5 psi of boost. Pretty much everything else was stock all the way down to the clutch. Oh yea, I had a short throw shifter and a under drive pulley, neither of which really mattered.
Later,
Originally posted by LUV94RX7
Would you think that run you had about 310-330 rwhp?
Ken
Would you think that run you had about 310-330 rwhp?
Ken
That same day I ran weighed my car at 2706 without me so I figured 2860 with me, I ran the 8.0 @ 90 with a 12.36 @ 113 1/4. I figured it was around 315 or so.
STEPHEN
Trending Topics
I hit a 8.71@89mph with a 2.3 60'. I hope that the track was slow. I spun all the way through 1st and 2nd on Nitto 555R's. I have heard that the track I was at is one of the worst ones around so if I go to a good track then I'll hope for better times.








