Pineapple 6-puck clutch impression
#1
Pineapple 6-puck clutch impression
Installed with RB 9.5 lbs flywheel and CFDF pressure plate 20% over OEM.
Did not note anything special about the clutch vs. the CFDF clutch plate except more springs and they're smaller springs.
Install was not difficult.
Streetable but don't catch me starting up a hill.
The clutch engages right away at about 25% of the pedal travel from top. It's great for double clutching with the light flywheel.
If you don't get it just right, the whole driveline will jump back and forth unless you got an engine torque brace then no problem with the pogoing effect.
If you're not stock power level, I would recommend it.
Did not note anything special about the clutch vs. the CFDF clutch plate except more springs and they're smaller springs.
Install was not difficult.
Streetable but don't catch me starting up a hill.
The clutch engages right away at about 25% of the pedal travel from top. It's great for double clutching with the light flywheel.
If you don't get it just right, the whole driveline will jump back and forth unless you got an engine torque brace then no problem with the pogoing effect.
If you're not stock power level, I would recommend it.
Thread
Thread Starter
Forum
Replies
Last Post