View Poll Results: PB blaster effective in chamber?
NO thats not healthy..
0
0%
Voters: 3. You may not vote on this poll
Pb Blaster In Chambers?
Pb Blaster In Chambers?
anyone try spraying a tablespoon or so of pb blaster to lubricate the seals after the engine has been sitting awhile or flooded? im thinking it will most likely work better than atf right? thats what it is made for penetration? it also says it will renew seals and gaskets.. so what do you guys say?
Rotary Freak
Joined: Jan 2002
Posts: 2,360
Likes: 0
From: Overland Park, KS
It might help break somethings loose if it has been sitting for a while. But afterwards you would need to put atf or something in there to help lube the seals, otherwise it will act as if it flooded.
almost done
Joined: Dec 2001
Posts: 1,049
Likes: 0
From: 250 HZ
a friend took out a good engine and let it sit for a really long time when we checked the apex seals 3 where stuck down so we sprayed them with pb and tapped them with a wooden stick 2 came loose and the 3rd one didnt
Thread
Thread Starter
Forum
Replies
Last Post
nycgps
3rd Generation Specific (1993-2002)
30
Sep 29, 2015 12:02 AM
