I NEED TO GET THE DOOR PANEL OFF, but can not figure out how to get it off without breaking it!! I have every thing un screwed but where the the 2 screw a the top of the handle that the window controls on, what do you have to take off to get to those screws!!???

 

take the window switch off. when you do that, you'll see the hidden screw.

 

you have to take a small flat blade screwdriver and pop the control out of the door handle. Then get a #2 phillups screwdriver and take the screw out that is in the back of the hole. Use a light to see it better.

Also there is a little "plug" on the lower section of the door panel. pop that out and there is also a screw there. Then if you have all the other mounting screws out of the panel and the lever area, the door should just pull up and off.

 

Read my writeup -

http://www.clubrx.org/default.asp?AC...=23&id=5&mnu=5

It's not too hard, but that hidden screw will get'cha.

Dale

 

This is where door panels are scratched up or destroyed. By your post it appears that you have not removed many panels before. Need the manual.

 

That's the ticket

 

lol well I work for a custom body shop, and I fiber glass door panels and put in systems. But this is the first RX7 door panel I have had off. But thanks guys!!! yeah I found the plug all the clips, all that good stufff but how to get that damn hidden screw!

 

like said previously, you have to pop the window switch out and then take a flashlight and you'll see a screw behind it that you have to take off.