I got almost eveything I am going to do for now sitting at home:

Pettite DP
Neo gear, ATF, brake fluid
temp gauge
boost gauge
dual pillar pod
fuel filter
FPD
Vacuum hoses
NGK spark plugs and wires
passenger and driver window switches


It all keeps adding up.....somebody stop me

I know I'll probably need a charge control solenoid in there too if anyone has one or knows the best place to buy. I'm assuming mazdaformance...they are my best firends right now.

 

That's nothing!

I have waiting at home

M2 Radiator
CWR Oil Coolers
Oil/Exhaust/Water Temp Gauges
Wiring for Valentine
Efini Y-Pipe
fuel filter (although I will wait for more miles)


I figure I will get a battery relocation kit first, since both the radiator and oil coolers want the battery removed for installation.

 

You list doesn't seem bad except for the FPD and hoses crap. Doing them at the same time is going to save you a good amount of work!! Also you might want to run by your local hardware store and pick up some bolts which match the screws comming out of your solenoid rack and dampener (i'm not sure exactly the size but once you get one out you can go to the store and match). It is very hard to get a screwdriver back in there let alone get them out w/o stripping, I had to use a pair of vice grips to get mine out. I think the next time I have to pull any of that stuff out it will be easy with a socket.

 

You guys suck! I don't have any parts laying around my house waiting to be installed and I feel left out. I suggest that both of you kindly send me some stuff and I'll feel "in" with the crowd. Please.

 

I have Front/Rear Sway bars & HKS Twin Power waiting for me to install them... I can't wait!

I just love adding a mod to my car and then taking my FD out for a drive and really FEELING the improvement! It's like Crack!

 

Soon ill have a rx7, complete engine and tranny with a m2 intake, new tires, rims, spoiler and head unit to install.

 

i only have an s-afc to install, although i had a clutch put in about 2 weeks ago...

 

i've got a boost guage that's been sittin around for a good 4+ weeks now, just waiting on the steering column from the 7store....patiently...(cause i cussed my heart out about 2 weeks ago over it)

 

Yeah, I am waiting on the new triple a-pillar mount from Tri-Power for my temp gauges...