RX7Club.com - Mazda RX7 Forum

3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:
Full Detail Automotive

Parts I need, where to get them. Need Asap.

Thread Tools
 
Search this Thread
 
Old Jun 3, 2007 | 05:08 PM
Share
  #1  
siadam's Avatar
siadam
Thread Starter
Rx7clubs's only Si.
 
Joined: Apr 2007
Posts: 33
Likes: 0
From: WV
Parts I need, where to get them. Need Asap.
For a 94 FD.

Aluminum J Bend 2.75" mandrel. Can't seem to find it anywhere.

Quality Fuel Pressure Regulator. Also what is the base (static) fuel pressure w/the hose disconnected & connected.

Thanks all in advance.

Reply
0
Old Jun 3, 2007 | 08:53 PM
Share
  #2  
siadam's Avatar
siadam
Thread Starter
Rx7clubs's only Si.
 
Joined: Apr 2007
Posts: 33
Likes: 0
From: WV
29 views and no advice?
Reply
0
Old Jun 3, 2007 | 09:07 PM
Share
  #3  
GARCO MOTORWORKS's Avatar
GARCO MOTORWORKS
Banned. I got OWNED!!!
 
Joined: Jul 2004
Posts: 1,179
Likes: 1
From: next to the polishing wheel!!!
Burns Stainless for the pipe . I set the fuel pressure at 40 lbs with the car at idle and the hose disconnected .This comes to me per Steve Kan .With the hose connected the pressure will be lower at idle .
Reply
0
Old Jun 3, 2007 | 09:13 PM
Share
  #4  
Mahjik's Avatar
Mahjik
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
Originally Posted by siadam
For a 94 FD.

Aluminum J Bend 2.75" mandrel. Can't seem to find it anywhere.
http://www.burnsstainless.com/

Originally Posted by siadam
Quality Fuel Pressure Regulator.
http://www.rx7store.net/product_p/aeromotive%20fpr.htm
http://www.rx7.com/store/rx7/fdfuel.html

Originally Posted by siadam
Also what is the base (static) fuel pressure w/the hose disconnected & connected.
https://www.rx7club.com/showpost.php...21&postcount=9

EDIT: Opps... A little late...
Reply
0
Old Jun 4, 2007 | 01:12 PM
Share
  #5  
siadam's Avatar
siadam
Thread Starter
Rx7clubs's only Si.
 
Joined: Apr 2007
Posts: 33
Likes: 0
From: WV
Thanks all for the help.

Parts are on order.

I do have a question.

The regulator ...



Has 3 fittings. The SARD unit had only 2. Fuel in --> Fuel out.

How does this get hooked up w/3?

Thanks again !!
Reply
0
Old Jun 4, 2007 | 01:49 PM
Share
  #6  
GARCO MOTORWORKS's Avatar
GARCO MOTORWORKS
Banned. I got OWNED!!!
 
Joined: Jul 2004
Posts: 1,179
Likes: 1
From: next to the polishing wheel!!!
Fuel in -fuel out - plug or gage
Reply
0
Old Jun 5, 2007 | 06:43 PM
Share
  #7  
siadam's Avatar
siadam
Thread Starter
Rx7clubs's only Si.
 
Joined: Apr 2007
Posts: 33
Likes: 0
From: WV
Originally Posted by GARCO MOTORWORKS
Fuel in -fuel out - plug or gage


Which holes?

Left in, bottom out, ight plug, middle guage ?
Reply
0

Trending Topics

Old Jun 5, 2007 | 06:51 PM
Share
  #8  
GoodfellaFD3S's Avatar
GoodfellaFD3S
Original Gangster/Rotary!
Veteran: Army
Tenured Member: 25 Years
Liked
Loved
iTrader: (213)
 
Joined: Mar 2001
Posts: 30,817
Likes: 656
From: FL-->NJ/NYC again!
Originally Posted by siadam
Which holes?

Left in, bottom out, ight plug, middle guage ?
doesnt matter, you can use them interchangeably.
Reply
0
Old Jun 5, 2007 | 07:12 PM
Share
  #9  
badddrx7's Avatar
badddrx7
All Spooled Up
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2001
Posts: 2,752
Likes: 3
From: Ironton,ohio
I have a couple spare 2.75" aluminum polished J's - mandrel bent. PM if interested.

tom
Reply
0
Old Jun 5, 2007 | 07:13 PM
Share
  #10  
neit_jnf's Avatar
neit_jnf
Eats, Sleeps, Dreams Rotary
Tenured Member: 20 Years
iTrader: (17)
 
Joined: Apr 2003
Posts: 4,060
Likes: 262
From: Around
cast aluminum 90deg elbows here: http://hiboost.com/elbows.html
Reply
0
Old Jun 6, 2007 | 12:53 PM
Share
  #11  
siadam's Avatar
siadam
Thread Starter
Rx7clubs's only Si.
 
Joined: Apr 2007
Posts: 33
Likes: 0
From: WV
Originally Posted by badddrx7
I have a couple spare 2.75" aluminum polished J's - mandrel bent. PM if interested.

tom

pm sent.

Reply
0
Old Jun 10, 2007 | 03:22 PM
Share
  #12  
siadam's Avatar
siadam
Thread Starter
Rx7clubs's only Si.
 
Joined: Apr 2007
Posts: 33
Likes: 0
From: WV
Originally Posted by GARCO MOTORWORKS
Burns Stainless for the pipe . I set the fuel pressure at 40 lbs with the car at idle and the hose disconnected .This comes to me per Steve Kan .With the hose connected the pressure will be lower at idle .


Did that...seemed to work great...

Reply
0
Old Jun 10, 2007 | 10:00 PM
Share
  #13  
GoodfellaFD3S's Avatar
GoodfellaFD3S
Original Gangster/Rotary!
Veteran: Army
Tenured Member: 25 Years
Liked
Loved
iTrader: (213)
 
Joined: Mar 2001
Posts: 30,817
Likes: 656
From: FL-->NJ/NYC again!
You should see about 2.2-2.3 bar at idle.
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mazda big brake kit problems :(
josef 91 vert
2nd Generation Specific (1986-1992)
23
Sep 3, 2015 11:20 AM
New Member, need help with parts
runner83
1st Gen General Discussion
16
Aug 26, 2015 05:16 PM
Turbo II brake help. Almost there.
Frisky Arab
2nd Generation Specific (1986-1992)
13
Aug 18, 2015 05:30 PM
Back to Subforum
3rd Generation Specific (1993-2002)
View Next Unread
tailight gaskets?




Advanced Search

All times are GMT -5. The time now is 07:40 AM.