Parts I need, where to get them. Need Asap.
For a 94 FD.
Aluminum J Bend 2.75" mandrel. Can't seem to find it anywhere. Quality Fuel Pressure Regulator. Also what is the base (static) fuel pressure w/the hose disconnected & connected. Thanks all in advance. :icon_tup: |
29 views and no advice?
|
Burns Stainless for the pipe . I set the fuel pressure at 40 lbs with the car at idle and the hose disconnected .This comes to me per Steve Kan .With the hose connected the pressure will be lower at idle .
|
Originally Posted by siadam
(Post 7005536)
For a 94 FD.
Aluminum J Bend 2.75" mandrel. Can't seem to find it anywhere.
Originally Posted by siadam
(Post 7005536)
Quality Fuel Pressure Regulator.
http://www.rx7.com/store/rx7/fdfuel.html
Originally Posted by siadam
(Post 7005536)
Also what is the base (static) fuel pressure w/the hose disconnected & connected.
EDIT: Opps... A little late... |
Thanks all for the help.
Parts are on order. I do have a question. The regulator ... http://www.rx7store.net/photos/Aeromotive%20FPR-2.jpg Has 3 fittings. The SARD unit had only 2. Fuel in --> Fuel out. How does this get hooked up w/3? Thanks again !! :cool: |
Fuel in -fuel out - plug or gage
|
Originally Posted by GARCO MOTORWORKS
(Post 7008258)
Fuel in -fuel out - plug or gage
Which holes? Left in, bottom out, ight plug, middle guage ? |
Originally Posted by siadam
(Post 7013343)
Which holes?
Left in, bottom out, ight plug, middle guage ? |
I have a couple spare 2.75" aluminum polished J's - mandrel bent. PM if interested.
tom |
cast aluminum 90deg elbows here: http://hiboost.com/elbows.html
|
Originally Posted by badddrx7
(Post 7013443)
I have a couple spare 2.75" aluminum polished J's - mandrel bent. PM if interested.
tom pm sent. :cool: |
Originally Posted by GARCO MOTORWORKS
(Post 7006210)
Burns Stainless for the pipe . I set the fuel pressure at 40 lbs with the car at idle and the hose disconnected .This comes to me per Steve Kan .With the hose connected the pressure will be lower at idle .
Did that...seemed to work great... :icon_tup: |
You should see about 2.2-2.3 bar at idle.
|
All times are GMT -5. The time now is 10:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands