Originally Posted by adam c
(Post 10594195)
My car is currently at the body shop. It has a couple of scratches on the drivers door, and a very small dent in the rear quarter panel. I just called the owner and asked about paint weights. He said that it would take about eight pounds of materials to cover my entire car. That includes primer, paint, and clear coat. Eight pounds for the whole car.
Stripping a car to paint it (for weight savings) seems a huge waste of time. |
just go to the gym already
|
Sand the whole thing down to bare metal then cover it with foil/vinyl :D I don't know if it's heavier or lighter but I'm guessing lighter.
|
Originally Posted by adam c
(Post 10594195)
Eight pounds for the whole car.
. |
When I painted my FC I maybe had 20lbs of materials in a box when I started, Considering I did not use it all and the ammount that was sanded off and on top of that the paint giving off the voc's when it sets up I would guess under 10lbs more like 5-7. Thats Bondo over the dings then sand, Primer surfacer over the whole car then sand, then a base then clear then sand the clear flat and buff.
Given the ammount that went into the gun on the scale and the fact that it gets considerably lighter when it dries Im going with 5-7lbs total. Nobody seems to worry when they put 18-19 inch rims and tires on their car but suddenly a few lbs of paint is a big deal? I easily gained 20lbs with 17X10's vs 16X7's Take your floor mats out :) |
Originally Posted by 2RotorsNaDream
(Post 10594264)
Its definitely not 8lbs, I'd guess my hood alone weighs 5lbs more than a clear coated unpainted carbon hood.
|
Originally Posted by adam c
(Post 10593284)
I have seen a lot of stupid threads over the years. This one has to be near the top.
Guess what?? You have to paint your car. It is going to add some minimal amount of weight to the car. That little bit of extra weight doesn't make any difference!!!! You have to paint the car!!!! Do you think that professional racers (like Nascar) don't want all those logos on the car because it weighs the car down? Maybe its time for a reality check? As someone mentioned...Im not talking about an FD Delorean tribute. (If) the paint weights 20lbs, Id like to remove it first before applying new paint. Im not looking for opinions on how you think I should build my car. My question was intended to anyone with actual experience or data pertaining to the typical weight of an automotive paint job.
Originally Posted by adam c
(Post 10593284)
That little bit of extra weight doesn't make any difference!!!!
1(1000)=1000(1)
Originally Posted by adam c
(Post 10593284)
You can't be serious!!! A gallon of red paint isn't going to have a different weight than a gallon of ANY other color.
Originally Posted by zeroG
(Post 10592829)
Is your real name Mark Webber?
Thanks to the rest of you for your input. I think its really interesting. |
Ok Sebastian. Read it all. Try to see the logic. Try to see the common sense. If you can't see it .............. read it again
|
I can't really comment on how much car paint weighs but where I work we use some kind of paint that comes in 5 gallon buckets.
I can't remember which color it was but one was much heavier than the others. It's non automotive paint but some paints do weigh more or less than others. |
Originally Posted by Supernaut
(Post 10593187)
I have a brand new unpainted fender from mazda and 2 CYM ones. IMO, the CYM fenders were noticably heavier (although they had the fender vents on them as well). 20 - 30 lbs would not surprise me in the least. I'm sure someone with more knowledge will post up any time now.
When rolling the fenders, my left front fender rolled like butter. That fender had been replaced with a new one. The right front fender was considerably harder to do. It could just be the quality of the metal, but IIRC the new one was actually thinner. If I get ambitious I will go out to the garage and measure it later. |
Originally Posted by adam c
(Post 10594134)
If that is true, wouldn't it also be true that it would take more red paint to cover a car, and that the weight would likely come out about the same?
I'd have to ask a body guy if it takes more paint in red to get a good color than other colors. David |
Dave,
Take a scale to any car parts store. Grab several cans of differently colored spray paint. I would wager that the red paint is no different than the others. |
Paint weight sepends on the type of paint and the quality of it. If it is bad quality you want to remove it all off anyway because it would reduce the quality of your paint in the long run (chipping, etc). But make sure to paint it with good quality paint and primer. And always give it a good waxing for that extra soothness :nod:
|
Originally Posted by dgeesaman
(Post 10594853)
Sure, but the adage was that a gallon of red weighs less than a gallon of other colors.
I'd have to ask a body guy if it takes more paint in red to get a good color than other colors. David there are poor hiding colors that take more coats, and there are tri coat paints ( such as CYM ) that are additional coats. reds, yellows, and even some blues can be poor hiding. single stage colors will be lighter then mettalics high solids primers will be heavier then finishing primers high solids clearcoats are heavier then some other clear coats I can weight any kind of paint you guys wish I have some on hand http://robx-7.nopistons.com/d/2919-1/bbs1+001.jpg |
Since you offered, please weigh a can of red paint vs cans of different colors. To be fair the paints must be of the same type and manufacturer.
Thank you in advance :) |
we can be more scientific, how about the total weight for a gallon according to the mix?
red is actually one of the lightest, white is heavy- you would think white would be light, but its not. paint I am referencing is DuPont Imron kenworth white: 4407 grams ( 9.715 lbs ) dark silver metallic 3783.5 grams ( 8.34 lbs ) peterbuilt red : 3968.5 ( 8.749 ) Chrysler dodge truck red : 3919 grams ( 8.639 ) seven-up company green : 4066 grams ( 8.963 ) |
There you go people, scientific proof that shows why red cars are faster :D
|
but it takes more coats to cover, so it might be 3 coats of black where the red will be 5-7coats
|
OMG not to mention that the paint probably loses weight when it dries. The debate about stripping the car was a little bit of a stretch.
The red vs world paint debate is beyond reason of any sort. Paint your cars aesthetically! Or I kill the kitteh! |
Originally Posted by GregW
(Post 10594401)
Take your floor mats out :)
https://i307.photobucket.com/albums/...hplDL6zzAM.jpg |
Originally Posted by Rob XX 7
(Post 10595228)
we can be more scientific, how about the total weight for a gallon according to the mix?
red is actually one of the lightest, white is heavy- you would think white would be light, but its not. paint I am referencing is DuPont Imron kenworth white: 4407 grams ( 9.715 lbs ) dark silver metallic 3783.5 grams ( 8.34 lbs ) peterbuilt red : 3968.5 ( 8.749 ) Chrysler dodge truck red : 3919 grams ( 8.639 ) seven-up company green : 4066 grams ( 8.963 ) I came across this: http://www.speedtalk.com/forum/viewt...4d7de0b6d35f91 The last few posts are interesting and suggest something around 20-40lbs (40 was including undercarrage). Of course this is taken with a grain of salt, but food for thought nonetheless. Thanks for the great data you guys are contributing! |
Good grief...
|
Is anyone taking into account the amount of weight that goes away once the paint dries?
|
Or over-spray.:dunno:
|
The can stated % of VOC's they will all evaporate so add up #gallons of paint * (1-VOC%)* (weight of full can-empty can) . I bet 6-20 lbs is about right.
|
All times are GMT -5. The time now is 12:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands