3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Other potential Problems???

Old Oct 14, 2001 | 04:20 PM
  #1  
Mpressiv's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 55
Likes: 0
From: Poughkeepsie NY
Question Other potential Problems???

Heres the situation...i just bought a 94 FD montego blue beigh leather interior. The car has the following mods.

Downpipe
midpipe
exhaust
apexi FMIC
apexi AVC-R
apexi turbo timer
apexi Power FC
1600 cc secondaries
RP fuel pump
stage 3 ACT clutch
Boost gauge
hose job
Greddy Type R BOV
Street Ported Engine and Rebuild with 3mm seals 4k miles ago by Rampage Racing
And last but not least a Greddy T-78 Turbo

Now my concern is that the body has 85k miles on it. He replaced the bushings in the rear suspension also. I plan on upgrading to H & R springs and Bilstein stutts, and upgrading to brembo brakes. Other than that is there anything else that i should be concerned with? Im worried about the Tranny with 88k miles on it. He has never dragged the car (which pisses me off cause i want to know what it runs....it made 400 RWHP @ 15lbs of boost....anyone have any idea what it may run?) so i guess the tranny hasn't been beaten to ****. The 5th gear syncro is fine also. no grinding. He also installed a brand new Mazda radiator. Should i sell that and go with the Fluidyne?

I paid 17k for the car. I feel that i got a decent deal considering the mods that are done to the car. What are your opinions? good deal, bad deal, average deal? Any input is appreciated. Thanks a lot
Reply
Old Oct 14, 2001 | 04:26 PM
  #2  
DK's Avatar
DK
40k worth of fail
Tenured Member 20 Years
iTrader: (5)
 
Joined: Mar 2001
Posts: 1,312
Likes: 0
From: Hermosa Beach, CA
That's a good deal you got ... but yeah, definitely get a better radiator with that big FMIC in there.
Reply
Old Oct 14, 2001 | 04:31 PM
  #3  
Mpressiv's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 55
Likes: 0
From: Poughkeepsie NY
thanks for the reply man. Yea i was thinking i would need that. What would you recommend, Koyo or fluidyne. Silver 7 posted his installation on the koyo radiator which i found very informative by the way...thanks silver 7....the koyo seems to be about 12mm thicker...is this better for my setup? will i run into any problems with that big *** intercooler up there? Thanks a lot.
Reply
Old Oct 14, 2001 | 11:17 PM
  #4  
Mpressiv's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 55
Likes: 0
From: Poughkeepsie NY
anyone have any input for me? please?
Reply
Old Oct 15, 2001 | 12:26 AM
  #5  
rxrx7's Avatar
Full Member
Tenured Member 10 Years
 
Joined: May 2001
Posts: 134
Likes: 0
From: Upper Darby, PA, USA
I'm not sure exactly who but there are a few guys with the Koyo with a FMIC
Reply
Old Oct 15, 2001 | 01:08 AM
  #6  
DK's Avatar
DK
40k worth of fail
Tenured Member 20 Years
iTrader: (5)
 
Joined: Mar 2001
Posts: 1,312
Likes: 0
From: Hermosa Beach, CA
I have the KOYO and a BLITZ FMIC, but my engine bay is empty right now. Because of that, I can't really give you any feedback on it, but I got the KOYO because it is only a little bit more expensive and a lot thicker. Good luck!
Reply
Old Oct 29, 2001 | 07:30 AM
  #7  
accurizing's Avatar
Junior Member
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 21
Likes: 0
From: Baton Rouge, La
Check Out My Reply In This Thread
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
PinkRacer
2nd Generation Specific (1986-1992)
43
Oct 1, 2015 09:13 AM
Captain Hook
2nd Generation Specific (1986-1992)
8
Sep 22, 2015 01:12 PM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:44 PM.