ok i just started my car and looked at my engine and i noticed that only one omp line had oil in it and the other one was dry...so i turbed my car off immediatly anobody no what could be wrong?

 

It's a common issue. Do a search and you'll find a good deal of info on this. Have you considered eliminating the OMP and going premix? It simplifies things a little under the hood - not to mention that you wouldn't be burning dirty oil. It also allows you to run synthetic oil in the crankcase.

 

can you get me a link i can find any threads in this problem.thanks in advance

 

I remember reading about this before. Spend some time searching for common key words. Check for any kind of mechanical blockage and injector function/vacuum/etc and check oil delivery at higher RPMs.

 

Another option is clean your Oil Injectors and the clean the OMP, get the adapter to run 2 stroke only through the OMP and thus your injectors will never clog up on you. I am going this route on my new engine.

 

Good point and good call