Rx-7$4$me

well, I got the rears done with my x drilled and slotted brembos plus hawk HPS pads.

after I put them on, I Went to try them out witht he parking brake. it worked so so.

when I first got the car, the parking brake did not work, so one day I adjusted it from the inside, not from the brakes, and it worked, but slowley lost its effect untill it stopped working. So I put the pads in, and it works so so again.

But aftert I used it, My right rear wheel will not spin by hand, but my left will with a bit of force.

will this change when I flush the entire brake fluid system and pump the brakes a few times? or did I do somthing wrong in the install?

Steve

Rx-7$4$me

Also I understand that the piston must be turned at a certain angle to go on the pad, but I cant figure otu what angle it should be at.. can anyone help me?

Steve

Rx-7$4$me

nevermind, I guess the problem was that the piston in the caliper wasnt lined up right..


Jeeze, Ive never had to ask questions with a brake pad change up untill the rears on an FD!!

rx7will

iTrader: (6)

Most rear disc brakes that have the parking brake incoroporated into the rear caliper, you have to turn the piston into the caliper so that the piston alings up with the notch on the pad. If you think that was hard try to do a rear brake job on a miata.