ok i am a newb and in process of non-seq
04-29-09, 04:09 AM
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: oakland ca
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
ok i am a newb and in process of non-seq
and i have searched for a pix of the stock fuel pressure regulater ...can someone tell me where it is at..i have the diagram for the process but i also have the manifold off and either it isnt there or i dont know what it looks like..and should i replace it with an aftermarket ..i also have a denso fuel pump..and to port the wastegate,do i have to remove the whole turbo setup..thx
04-29-09, 02:43 PM
#4
Senior Member
iTrader: (4)
Join Date: Apr 2008
Location: Montana
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
The regulator is easy to find where your intake manifold bolts on, look on the back side tords the fire wall and you will see a vac house coming out of a circular deal that is connected to your secoundary fuel rail. Its really simple, i would suggest looking at the engine disasemble in the fsm which means the factory manual.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
joel(PA)
Group Buy & Product Dev. FD RX-7
8
10-04-15 06:07 PM
FC3S Timmy
2nd Generation Specific (1986-1992)
8
10-02-15 08:08 AM
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM