oil catch tank
#1
Junior Member
Thread Starter
Join Date: Jul 2002
Location: Indonesia
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
oil catch tank
just got a cusco oil catch tank, just wondering which lines do i plug to the tank.
does anyone have any pictures or know of a website.
cheers...et
does anyone have any pictures or know of a website.
cheers...et
#2
HARRRRRRRRR
Join Date: Jan 2002
Location: Marietta GA
Posts: 1,858
Likes: 0
Received 0 Likes
on
0 Posts
I was looking into this mod. Does it not come with directions on installation? www.reaganracing.com I think is the site I saw a write up on.
*edit* link is not right...I will try to find it*
*edit* link is not right...I will try to find it*
#3
HARRRRRRRRR
Join Date: Jan 2002
Location: Marietta GA
Posts: 1,858
Likes: 0
Received 0 Likes
on
0 Posts
#4
Polishing Fiend
iTrader: (139)
Gents (I assume)
I will be modifying this setup slightly. Instead of taking the line from the upper nipple on the filler neck I will be mounting a barbed elbow tapped into the top of the oil cap. And capping both niplles onthe filler neck. I will run the line from this fitting to the catch can. I was still getting too much oil pickup using the filler neck nipple. Fellow "trackers"
say moving the line to the highest location (the cap itself) should reduce the oil pickup to next to nothing.
Regards,
Crispy (Regan)
I will be modifying this setup slightly. Instead of taking the line from the upper nipple on the filler neck I will be mounting a barbed elbow tapped into the top of the oil cap. And capping both niplles onthe filler neck. I will run the line from this fitting to the catch can. I was still getting too much oil pickup using the filler neck nipple. Fellow "trackers"
say moving the line to the highest location (the cap itself) should reduce the oil pickup to next to nothing.
Regards,
Crispy (Regan)
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM