3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Oil bottom of 2nd turbo closes to firewall

Thread Tools
 
Search this Thread
 
Old 10-12-07, 11:29 PM
  #1  
Rotary Enthusiast

Thread Starter
 
Join Date: Jul 2003
Location: Toronto
Posts: 823
Likes: 0
Received 0 Likes on 0 Posts
Oil bottom of 2nd turbo closes to firewall

Was just changing my oil tonight and found some fresh oil on the back of my 2nd turbo i was just wondering if this is a sign OF A leaky turbo oil return line ?

what are your guys thoughts?
Old 10-13-07, 06:53 AM
  #2  
Moderator

iTrader: (7)
 
dgeesaman's Avatar
 
Join Date: May 2002
Location: Fort Kickass
Posts: 12,302
Received 16 Likes on 15 Posts
If the oil is below the 2nd turbo that's where I'd start looking.

If it's on the aluminum compressor housing, I think it's unlikely the oil lines would leak onto that. In that case remove the turbo piping (y-pipe) and see if there is oil leaking through the gaskets.

Dave
Old 10-13-07, 10:12 PM
  #3  
Rotary Enthusiast

Thread Starter
 
Join Date: Jul 2003
Location: Toronto
Posts: 823
Likes: 0
Received 0 Likes on 0 Posts
what would cause oil to be on the bottom of my secondary turbo? i couldnt see if there was any on the primary because of the heat shields, i was just taking a quick look while i was changing oil....
Old 10-14-07, 12:55 AM
  #4  
Rotary Enthusiast

iTrader: (3)
 
zack4173's Avatar
 
Join Date: Jan 2006
Location: Bonney lake Washington
Posts: 1,020
Likes: 0
Received 0 Likes on 0 Posts
mine is leaking from the secondary turbo right at the oil outlet pipe. I know my problem is a loose bolt. I would suggest getting under the car and taking a look at that.
Old 10-14-07, 10:58 AM
  #5  
Rotary Enthusiast

Thread Starter
 
Join Date: Jul 2003
Location: Toronto
Posts: 823
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by zack4173
mine is leaking from the secondary turbo right at the oil outlet pipe. I know my problem is a loose bolt. I would suggest getting under the car and taking a look at that.
Where is the oil outlet pipe located ?
would it be easier to acccess it by going through the engine bay or under the car up the engine bay.

Is it possible to take off the front right tire and then remove that plastic stuff from the wheel well which will put you in direct line of site of the turbos? anyone done this before?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
FD7KiD
3rd Generation Specific (1993-2002)
15
02-26-21 10:12 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM



Quick Reply: Oil bottom of 2nd turbo closes to firewall



All times are GMT -5. The time now is 03:07 PM.