OEM radio antenna wiring connections
#1
OEM radio antenna wiring connections
I知 in the process of getting my old radio working again and found that the antenna connections to the board have been ripped out. I managed to solder 3 new wires to the board and am not 100% sure where they go. I知 assuming 2 are for the coax cables for the 2 antennas. Not sure about the 3rd and my trial and error has not worked out.
if anyone has as old unit lying around and can have a look it would be appreciated(should not matter if it is a Bose or non Bose). It痴 a long shot but in thought I would ask.
Thanks!
if anyone has as old unit lying around and can have a look it would be appreciated(should not matter if it is a Bose or non Bose). It痴 a long shot but in thought I would ask.
Thanks!
#3
The 3 wires are related to reception only as they go into the 2 antenna leads coming out of the corner of the unit. The main harness has the power antenna controls. Everything is working on the radio except there is no AM/FM reception. Though this would be an easy fix. Famous last words...
The board could also be damaged but before I dig into it I wanted to confirm the wiring.
The board could also be damaged but before I dig into it I wanted to confirm the wiring.
Thread
Thread Starter
Forum
Replies
Last Post