3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Odd problem.Help

Thread Tools
 
Search this Thread
 
Old 06-19-06, 03:20 PM
  #1  
Junior Member

Thread Starter
 
xblackbikex's Avatar
 
Join Date: Sep 2005
Location: upper michigan
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Odd problem.Help

I drove my seven for like two weeks after putting a motor in it and all was fine. Then i had the Check engine light for intake air temp so i replaced that. But right when that went bad the car wouldnt run good at all it had symptoms like bad vibrating, no power, doesnt feel like its boosting, feels like it could be in limp Mode. Ive checked everything i could think of being new to rotary and even swapped map sensors with an extra i have. But now i have no more check engine lights to troubleshoot except the egr one. The car may be flooding itself out. Im not positive but what the plugs have shown me it looks like its running too rich. I have reset the ecu a bunch of times. The car doesnt stall at all, you can start it and rev it to around 4000 thats as high as i wanted to go with it running bad and let off and no stalls or anything.

anu help would be great im pretty stumped and there is nothing but carburated v8s in upper michigan im going to try to get a video up on here tonight.
Old 06-19-06, 05:16 PM
  #2  
Junior Member

Thread Starter
 
xblackbikex's Avatar
 
Join Date: Sep 2005
Location: upper michigan
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
bumpity bump bump
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1NSIGHT
Drifting
8
09-29-15 12:18 PM
Rotospectre
New Member RX-7 Technical
0
09-13-15 11:22 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM
befarrer
2nd Generation Specific (1986-1992)
4
08-14-15 04:18 PM



Quick Reply: Odd problem.Help



All times are GMT -5. The time now is 04:46 AM.