OBX header for stock twins??
#1
Senior Member
Thread Starter
Join Date: Feb 2003
Location: Denver, CO
Posts: 577
Likes: 0
Received 0 Likes
on
0 Posts
OBX header for stock twins??
http://cgi.ebay.com/ebaymotors/ws/eB...&category=6770
Check out this link. Has anyone used this header? I sent them an email asking if this header will work with the stock twins and they said yes, but I didn't find anyone using it with twins here when I searched. Do you think it will work with a stock airbox w/ kn, hks dp, and 5zigen exhaust without fuel upgrades? Do I need to worry about blowing my motor? It is completely stock except for the parts listed above. Thanks.
Check out this link. Has anyone used this header? I sent them an email asking if this header will work with the stock twins and they said yes, but I didn't find anyone using it with twins here when I searched. Do you think it will work with a stock airbox w/ kn, hks dp, and 5zigen exhaust without fuel upgrades? Do I need to worry about blowing my motor? It is completely stock except for the parts listed above. Thanks.
#2
No it is for a T4 flanged turbo and HKS style wastegate..
It will not work with the stock twins..
It has been used by people here.. It will only work with a small TO4 turbo unless you make an adapter to give it more room.
I think you should stay away from this until you learn more.. going single turbo without the help of a competent tuner, you will end up walking..
-Zach
It will not work with the stock twins..
It has been used by people here.. It will only work with a small TO4 turbo unless you make an adapter to give it more room.
I think you should stay away from this until you learn more.. going single turbo without the help of a competent tuner, you will end up walking..
-Zach
#3
Senior Member
Thread Starter
Join Date: Feb 2003
Location: Denver, CO
Posts: 577
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I actually don't want to go single anyway. I want to stay with some type of sequential setup. Most likely the BNR Stage 3's eventually. Thanks for the info. I guess their email support person doesn't know what they are talking about.
#4
Rotary Enthusiast
Originally posted by zyounker
It has been used by people here.. It will only work with a small TO4 turbo unless you make an adapter to give it more room.
-Zach
It has been used by people here.. It will only work with a small TO4 turbo unless you make an adapter to give it more room.
-Zach
Can you run a T04s? t04r without a spacer?
thanks
thesaint
#6
Originally posted by the_saint
How large a T04 is too large?
Can you run a T04s? t04r without a spacer?
thanks
thesaint
How large a T04 is too large?
Can you run a T04s? t04r without a spacer?
thanks
thesaint
Well i have never done it so don't quote me.. but i believe someone got a TO4S on with a small turbine of like .84... But not sure..
Try searching.. i think the thread may have been deleted or pruned though..
Trending Topics
#8
Well it isn't like he made it.. he is just some reseller of rice.. And OBX is not a great brand.. but from what people say it is a decent manifold.. And alot of people consider tubular turbo manifolds headers.. (Even though they are not)
Thread
Thread Starter
Forum
Replies
Last Post
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM