numbers estimate for this setup?
#1
proper motoring
Thread Starter
numbers estimate for this setup?
I'm looking at running the following setup...
tkt cold air induction, koyo aluminum radiator, 3" stainless downpipe, 3" hiflow stainless cat center, and a 3" stainless tkt cat back at 10psi max. I know that there are a few other elctronic items etc that I'll be need to purchase to control it all, but does anyone have any idea what type of numbers I could expect like that? As far as the per part estimates run, by my calculations, i should be looking at around 350hp at the flywheel.
please let me know what ya'll think.
tkt cold air induction, koyo aluminum radiator, 3" stainless downpipe, 3" hiflow stainless cat center, and a 3" stainless tkt cat back at 10psi max. I know that there are a few other elctronic items etc that I'll be need to purchase to control it all, but does anyone have any idea what type of numbers I could expect like that? As far as the per part estimates run, by my calculations, i should be looking at around 350hp at the flywheel.
please let me know what ya'll think.
#2
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
I'm not sure how you came up with 350 bhp, but....you aren't going to get there.
With those mods, I would imagine you would be putting down around 260 rwhp at 10 psi, which is about 300 bhp.
With those mods, I would imagine you would be putting down around 260 rwhp at 10 psi, which is about 300 bhp.
#3
proper motoring
Thread Starter
Pettit racing claims that the intake (i forgot to mention new pulleys too) new pulleys and the cat back they make ALONE on a stock motor ads 60 at the flywheel.
that's where i was getting the numbers from. their webpage is pettitracing.com and that set is listed as their base performance package (ad 60+hp). i have a tendency to trust them on that being i've not hear anything bad about them before... other than slightly higher prices.
that's where i was getting the numbers from. their webpage is pettitracing.com and that set is listed as their base performance package (ad 60+hp). i have a tendency to trust them on that being i've not hear anything bad about them before... other than slightly higher prices.
#5
Buy my car!
Join Date: Jun 2003
Location: Raleigh, NC (NCSU)
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
They always overestimate. Also not all cars are the same. Even if you have the exact same setup in two different cars it's extremely unlikely that they will produce the same numbers.
#6
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
Originally posted by pugg57
Pettit racing claims... i have a tendency to trust them on that being i've not hear anything bad about them before... other than slightly higher prices.
Pettit racing claims... i have a tendency to trust them on that being i've not hear anything bad about them before... other than slightly higher prices.
#7
Cheap Bastard
iTrader: (2)
Originally posted by pugg57
Pettit racing claims that the intake (i forgot to mention new pulleys too) new pulleys and the cat back they make ALONE on a stock motor ads 60 at the flywheel.
Pettit racing claims that the intake (i forgot to mention new pulleys too) new pulleys and the cat back they make ALONE on a stock motor ads 60 at the flywheel.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
Mrmatt3465
Interior / Exterior / Audio
8
09-17-15 01:28 PM
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM