Number of Holes?
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Location: Canada
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
Number of Holes?
If I wanted to add an EGT guage as well as a wideband A/F ratio guage would that require 2 extra holes in the DP for a total of 3? 1 for the stock O2 sensor. 1 for the EGT. 1 for the wideband. Is that correct? What order should the sensors go on the DP?
Thanks
Brad
Thanks
Brad
#2
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
Depending on how far down the o2 sensor bung is placed, you may be able to use that for your wideband sensor bung and just have the wideband controller send a simulated narrowband output to the ecu. Otherwise, you want the wideband sensor bung at the bottom of the downpipe, where it flattens out.
You want the EGT as far up as possible, ideally it would be mounted in the manifold before the turbos.
You want the EGT as far up as possible, ideally it would be mounted in the manifold before the turbos.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
erevos
2nd Generation Specific (1986-1992)
4
09-15-15 09:19 AM