3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Not a good noise from my engine!

Thread Tools
 
Search this Thread
 
Old Apr 16, 2010 | 12:57 PM
  #1  
RX7ANDRX8MARINE's Avatar
Thread Starter
Jengels10
 
Joined: Feb 2010
Posts: 20
Likes: 0
From: japan
Not a good noise from my engine!

my engine is making a bad noise when i start it. it is only right when i start the car for about 2 seconds. its hard to explain the noise, i would have to say its like a screeching/high pitched grinding noise. i know it could probobaly be alot of things im just wondering if anyone else has had this problem n might know what it is.
Reply
Old Apr 16, 2010 | 01:06 PM
  #2  
TpCpLaYa's Avatar
T3DoW
Tenured Member 20 Years
iTrader: (10)
 
Joined: Nov 2001
Posts: 3,755
Likes: 5
From: Chicago - NW Burbs
I'd look into the belts or the pulleys and see if you can narrow the sound down
Reply
Old Apr 16, 2010 | 02:30 PM
  #3  
armytim2002's Avatar
Preheated Badger
Tenured Member 10 Years
 
Joined: Apr 2008
Posts: 198
Likes: 0
From: Sierra Vista, AZ
Yeah sounds like it could be a worn or loose belt. Id probably have a friend start the car while you are over the engine to see if you can narrow it down to an area in the bay like TpCpLaYa mentioned.
Reply
Old Apr 16, 2010 | 02:33 PM
  #4  
LBC_FC3S's Avatar
Compita Racing
Tenured Member 15 Years
iTrader: (17)
 
Joined: Nov 2007
Posts: 1,123
Likes: 0
From: LBC
try to hear the water pump to see if its making noise
Reply
Old Apr 16, 2010 | 02:38 PM
  #5  
arghx's Avatar
rotorhead
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Aug 2004
Posts: 16,205
Likes: 461
From: cold
if it's mostly on startup, it is likely belt related
Reply
Old Apr 16, 2010 | 03:30 PM
  #6  
Prometheus's Avatar
Still got it.
Tenured Member: 15 Years
iTrader: (2)
 
Joined: Jan 2007
Posts: 1,687
Likes: 3
From: Seattle, Washington
have you cleaned your engine bay with water lately?

sometimes water gets into pullies (blast it out with an air gun)

or belts can slip (tighten or replace them)
Reply
Old Apr 16, 2010 | 04:41 PM
  #7  
Erix7rew's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (7)
 
Joined: Oct 2008
Posts: 374
Likes: 1
From: Victoriaville
I'm surprised that nobody think that it's probably the starter that not return fast enough to it standby position!!!

Good luck!

My 2 cents

Eric
Reply
Old Apr 17, 2010 | 04:02 PM
  #8  
armytim2002's Avatar
Preheated Badger
Tenured Member 10 Years
 
Joined: Apr 2008
Posts: 198
Likes: 0
From: Sierra Vista, AZ
it might be if it is more of a grinding noise than screeching noise. How long does it last? If it lasts for just a second after start up it might be but if it lasts for a little while than its probably a belt issue. Does it get louder when you give it gas?
Reply
Old Apr 17, 2010 | 06:13 PM
  #9  
TpCpLaYa's Avatar
T3DoW
Tenured Member 20 Years
iTrader: (10)
 
Joined: Nov 2001
Posts: 3,755
Likes: 5
From: Chicago - NW Burbs
You know that's a good point that's been raised. I had an issue a little while ago where there was a HORRIBLE grinding/screeching noise but it didn't go away. I finally tracked it down to the IGNITION switch! The switch was bad enough that while the car was in 'run' the starter was still being fed power causing the problem. It was such a heart wrenching feeling until I figured it out and fixed it with a new switch....however I still think this problem is a belt/bearing maybe. Get some stethoscope ears and place it near each of the pulleys at start up to see if you can pick up the noise.
Reply
Old May 1, 2010 | 08:25 AM
  #10  
RX7ANDRX8MARINE's Avatar
Thread Starter
Jengels10
 
Joined: Feb 2010
Posts: 20
Likes: 0
From: japan
thank you everyone for your input
Reply
Old May 1, 2010 | 10:17 AM
  #11  
Hotwheelz's Avatar
Who say's i need a Van
Tenured Member 05 Years
iTrader: (18)
 
Joined: Feb 2009
Posts: 609
Likes: 2
From: Whatsittoya
I had the same problem as you described and it was a worn out belt. When i accidentally spilled a little coolant on the belt it made the noise worse
Reply
Old May 1, 2010 | 10:42 AM
  #12  
JTurtonRX_7's Avatar
EFR IWG 8374
Tenured Member 20 Years
 
Joined: Aug 2003
Posts: 635
Likes: 0
From: C. Springs
im going to vote, starter sticking. Ill take a video of it later. My car does it most times it starts up
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
gtcd
1st Generation Specific (1979-1985)
30
Aug 19, 2015 02:44 AM
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM




All times are GMT -5. The time now is 12:04 AM.