Normal readings for A/F and EGT gauges..in combo
#1
Full Member
Thread Starter
Join Date: Feb 2002
Location: Texas
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Normal readings for A/F and EGT gauges..in combo
I just ordered my EGT gauge and already have an A/F gauge. What is the normal reading or safe reading for the EGT gauge. YES, I did search and the answer escaped me!
Normal EGT readings??? Anyone? Oh yeah, I have stock twins, dp, mp, cb and PFS I/C (pos).
Normal EGT readings??? Anyone? Oh yeah, I have stock twins, dp, mp, cb and PFS I/C (pos).
#3
Eats, Sleeps, Dreams Rotary
Sorry dude, I really don't have an answer...BUT my question is right up the same alley..I just got through installing a set of the defi link system gauges...pretty nice setup for anyone considering it...
What should the reading on
EGT=
Water=
Oil temp=
Vacuum on Boost= 17-19?
Thanks..
What should the reading on
EGT=
Water=
Oil temp=
Vacuum on Boost= 17-19?
Thanks..
#4
Senior Member
Join Date: Feb 2002
Location: Vancouver, Canada
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
from what i heard, the egt should never run over 1000 degree celsius at WOT. it should be around 920-950 DC.
if street driving its ok to go over 1000 DC just NEVER at WOT. thats what i heard ne ways.
if street driving its ok to go over 1000 DC just NEVER at WOT. thats what i heard ne ways.
#5
I'm a CF and poop smith
Water temp should be at 200 degrees for the stock thermostat, never over 210 (if so, shut it down and turn your fans on to a higher setting and pop your hood to let it cool off.) vaccum should be between 16-20inhg at idle in netural.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
t-von
3rd Generation Specific (1993-2002)
9
09-10-15 01:56 PM
Tem120
3rd Generation Specific (1993-2002)
4
09-07-15 09:53 AM
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM