is this normal (pic attached)
0-rotor-0-turbo-0-fd
Joined: Sep 2002
Posts: 1,640
Likes: 0
From: NYC
I know a good welder who I'm thinking to bring my spare twins to weld, It's pretty bad around the wastegate even worse than the picutere above + I ported it...
Just to experiment, hopefully might work, this dude braggs about his welding techniques and will do it for FREE so it's worth a try.
Just to experiment, hopefully might work, this dude braggs about his welding techniques and will do it for FREE so it's worth a try.
Originally Posted by dgeesaman
I would not expect it to work. This is often the result of prestresses and impurties in the casting, combined with stresses caused by thermal expansion. A coating might cover it, but not stop it. The thermal expansion around the cracks could cause the coating to break loose, in fact.
It would be interesting to tear down a new set of turbos and have the housings stress relieved and NDE'd to start with the best possible casting. But in the end, all that effort isn't much different than replacing them every 60-100k.
Dave
It would be interesting to tear down a new set of turbos and have the housings stress relieved and NDE'd to start with the best possible casting. But in the end, all that effort isn't much different than replacing them every 60-100k.
Dave
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Rotary Car Performance
4
Oct 28, 2020 11:01 AM
rx8volks
Canadian Forum
3
Aug 20, 2015 10:24 PM
