non-sequential problem?
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2001
Location: stp
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
non-sequential problem?
don't know the problem is but, I could boost past 10psi, and when the turbos comes on line, it make a very loud wind noise, almost like a semi-truck's. I just took the intercooler piping and the intake off, and couldn't find anything wrong with it. I spin the turbo blade, and it spins freely with no noise??? did my turbo **** on me already???
#2
Full Member
Join Date: Nov 2003
Location: Boulder, Colorado
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
How many miles on the turbo?
How many miles on the turbo?
Did you just eleminate lots of vaccum hoses to make non-seq?
Or, you actually welded the turbo precontrol plate (on turbo) and turbo control plate (on exhaust manifold)?
did you secured all the bolts and nuts after the conversion to non-seq?
I had that kind of noise, but after I changed it to non-seq, that noise has gone.
Now, I can boost up to 13-14 psi all the way to the redline.
If you just disabled vaccum hoses, try it harder way, weld it.
Did you just eleminate lots of vaccum hoses to make non-seq?
Or, you actually welded the turbo precontrol plate (on turbo) and turbo control plate (on exhaust manifold)?
did you secured all the bolts and nuts after the conversion to non-seq?
I had that kind of noise, but after I changed it to non-seq, that noise has gone.
Now, I can boost up to 13-14 psi all the way to the redline.
If you just disabled vaccum hoses, try it harder way, weld it.
#3
Senior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2001
Location: stp
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
I've been running non-sequential for about a year now, and the turbo has about 66,000 miles on it . I didn't weld any on it, I only used hangers to hold the wastegate control arm and pre-control arm. When I check the arm on the pre-control, it was kind of loose, I forgot which way that it suppose to be?.. other than that everything seems fine...
Thread
Thread Starter
Forum
Replies
Last Post
Snook
3rd Generation Specific (1993-2002)
17
02-27-21 02:54 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM