No Turn Signals or Hazards
Thread Starter
Slam Pig
Joined: Dec 2002
Posts: 888
Likes: 0
From: New York
No Turn Signals or Hazards
Ok ive been searching this board and nopistons for a couple days with no luck...Heres the deal.....
I have parking lights and head lights, all that works fine but no turn signals or hazards. When I goto turn them on I dont even get a clicking sound just dead..same with the hazard button. I tore about the steering column and nothing looks stupid (but thats hard for me to tell)

I checked all the fuses under the dash (twice) and none of them are shot...I checked the TNS and tried a different one (the one sitting right next to it thats blue, hope that wasnt a bad move) and it helped nothing...
The car does have a turbo timer...but the install seems legit and not a hack job.....any ideas....going nuts......

sysadmin-racing.com
I have parking lights and head lights, all that works fine but no turn signals or hazards. When I goto turn them on I dont even get a clicking sound just dead..same with the hazard button. I tore about the steering column and nothing looks stupid (but thats hard for me to tell)

I checked all the fuses under the dash (twice) and none of them are shot...I checked the TNS and tried a different one (the one sitting right next to it thats blue, hope that wasnt a bad move) and it helped nothing...
The car does have a turbo timer...but the install seems legit and not a hack job.....any ideas....going nuts......

sysadmin-racing.com
When someone broke into my honda (smashing my dash- and hazard button in the process) my blinkers/hazards didnt work. I' have no idea if the FD is set up the same way the honda is- but i guess the blinkers all ran through the hazard button.
If you already checked the fuses thats all i can think of.
-Ben
If you already checked the fuses thats all i can think of.
-Ben
i have had the same problem. changed the flasher ecu, all the switch assembly and still no workie. i think my hazard switch is fucked and somehow it's related i think. i gave up. maybe when i ain't so lazy i will look into the hazard switch. k
Same thing happen to a friend of mine. He changed the flasher ecu with no luck, then he found one of the wire was burnt so he replaced it and it works now. Grab a test light and start testing.
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
Farkel
3rd Generation Specific (1993-2002)
4
Sep 16, 2015 06:16 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM



