3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

No starter, no fuel blown 10a room fuse

Thread Tools
 
Search this Thread
 
Old 07-02-14, 04:33 PM
  #1  
Full Member

Thread Starter
iTrader: (4)
 
Sm1nts2escape's Avatar
 
Join Date: Nov 2005
Location: maryland
Posts: 143
Likes: 0
Received 4 Likes on 2 Posts
No starter, no fuel blown 10a room fuse

I started the car earlier today and left the battery hooked up. Came back later during the day to start it and it and nothing. The starter doesn't click the fuel pump doesn't prime. I found the 10a room fuse had blown and replaced it. After that the mileage on the odometer doesn't show. Remove the room fuse and it shows mileage again. I am suspecting a blown theft deterrent device or ecu. Any ideas? Thanks
Old 07-02-14, 05:51 PM
  #2  
Full Member

iTrader: (8)
 
simronrx7's Avatar
 
Join Date: Sep 2012
Location: CA
Posts: 176
Likes: 0
Received 0 Likes on 0 Posts
There's a blue relay (H302 I believe) near the fuse box behind the dead pedal. Remove that and jumper the 2 connections that correlate to the 2 thicker wires.

Should fix your problem.
Old 07-03-14, 12:59 PM
  #3  
Full Member

Thread Starter
iTrader: (4)
 
Sm1nts2escape's Avatar
 
Join Date: Nov 2005
Location: maryland
Posts: 143
Likes: 0
Received 4 Likes on 2 Posts
Originally Posted by simronrx7
There's a blue relay (H302 I believe) near the fuse box behind the dead pedal. Remove that and jumper the 2 connections that correlate to the 2 thicker wires.

Should fix your problem.

Have you seen this happen before and that fixed it? Or are you just telling me how to bypass the theft device? I will try to bypass the theft this weekend. will update then. Thanks
Old 07-03-14, 01:37 PM
  #4  
Full Member

iTrader: (8)
 
simronrx7's Avatar
 
Join Date: Sep 2012
Location: CA
Posts: 176
Likes: 0
Received 0 Likes on 0 Posts
CA

Originally Posted by Sm1nts2escape
Have you seen this happen before and that fixed it? Or are you just telling me how to bypass the theft device? I will try to bypass the theft this weekend. will update then. Thanks
I had the same problem and that solved it. Also I would check the voltage of your battery. That was another problem I had.
Old 07-03-14, 06:11 PM
  #5  
Full Member

Thread Starter
iTrader: (4)
 
Sm1nts2escape's Avatar
 
Join Date: Nov 2005
Location: maryland
Posts: 143
Likes: 0
Received 4 Likes on 2 Posts
oK So I bypassed the relay and still no starter or fuel pump. What has me puzzled is that when I plug the 10a room fuse in my mileage doesn't show. So something is definitely grounding out.
Old 07-03-14, 07:05 PM
  #6  
Full Member

Thread Starter
iTrader: (4)
 
Sm1nts2escape's Avatar
 
Join Date: Nov 2005
Location: maryland
Posts: 143
Likes: 0
Received 4 Likes on 2 Posts
Rubber plug for clutch switch dryrotted and fell out. Temporarily put a bolt in it and runs again. Thanks
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Boriquaguerrero
2nd Generation Specific (1986-1992)
20
04-22-19 01:15 PM
Queppa
New Member RX-7 Technical
8
09-02-18 09:53 AM
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM
torky007
3rd Generation Specific (1993-2002)
7
08-17-15 05:14 PM



Quick Reply: No starter, no fuel blown 10a room fuse



All times are GMT -5. The time now is 05:55 AM.