13bhavoc

Ok so I have installed the engine, got the rest of my fab work done. I put the fluids in and pull the EGI relay, and crank the engine to get oil pressure up, you can hear compression coming from the fresh engine. Plugged the relay back in and go to crank. Everything cranks but no go. Friend tests for spark and we are getting spark, I also checked my plug wires for 3948573894578934 time to make sure they are connected right. Hooks up the noid light to primaries and nothing, continues to hook up the noid light to the rest and still nothing. Checked to make sure my CAS is hooked up and everything checked ok. Any help with this situation, I found a similar post about this and will try to follow the advice given there. As far as fuel and ECU goes its all stock just wanted to see if i can get the car started untill i get my PFC. I have removed the rats nest, and since this is the first time working on a RX, im thinking im forgetting to coneect something or maybe I have a broken wire somewhere. Any advice would be highly appreciated.

Dave

jdhuegel1

I had the SAME problem.. And I fought it for 10 days.. Turns out the battery ground wasn't strong enough. Don't ask me WHY, or HOW though.. I added a second ground off the neg battery terminal and the POS fired right up.. Check your grounds is my recommendation..

Justin