3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

No heat. No power to flapper door

Thread Tools
 
Search this Thread
 
Old Dec 4, 2010 | 07:10 PM
  #1  
adam c's Avatar
Thread Starter
Cheap Bastard
iTrader: (2)
 
Joined: Sep 2002
Posts: 8,368
Likes: 50
From: San Luis Obispo, Ca
Question No heat. No power to flapper door

I have not had any heat in my car for a few years. Usually not a problem. It would be nice if it worked.

Today I removed the plastic cover that protects the motor that opens and closes the door which mixes hot and cool air to the desired temperature. With the car on, the door did not move when I turned the dial to "mix" the air. The motor didn't appear to be receiving any power, or signal to move the door.

Any suggestions on what may be the problem would be appreciated.

Thanks, Adam
Reply
Old Dec 4, 2010 | 07:52 PM
  #2  
mad_7tist's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 1,899
Likes: 0
From: tampa
rear wiper fuse ok?
rheostat (adjustable temp ****)?
hvac controler
Reply
Old Dec 4, 2010 | 08:29 PM
  #3  
adam c's Avatar
Thread Starter
Cheap Bastard
iTrader: (2)
 
Joined: Sep 2002
Posts: 8,368
Likes: 50
From: San Luis Obispo, Ca
Rear wiper fuse is good (I don't have a rear wiper).

Temp **** moves properly and is seated correctly in dash.

Don't what you mean by hvac controller. AC works fine.
Reply
Old Dec 6, 2010 | 10:15 AM
  #4  
adam c's Avatar
Thread Starter
Cheap Bastard
iTrader: (2)
 
Joined: Sep 2002
Posts: 8,368
Likes: 50
From: San Luis Obispo, Ca
Any other suggestions?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
msilvia
3rd Generation Specific (1993-2002)
28
Apr 14, 2016 12:58 PM




All times are GMT -5. The time now is 10:24 AM.