3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

no cluster lights no crank after going single

Thread Tools
 
Search this Thread
 
Old Nov 9, 2007 | 02:38 PM
  #1  
7_7's Avatar
7_7
Thread Starter
Full Member
iTrader: (1)
 
Joined: Oct 2007
Posts: 50
Likes: 0
From: ca
no cluster lights no crank after going single

hey guys just finished my single turbo upgrade and have a few questions. i hooked up all connectors and grounds and made sure everything is how it supposed to be and when i go to crank the car there no cluster lights, no crank. im puzzled since i double checked everything 2x. when i do put the key in the idnition it has that 1st set of beep when the door is open but thats it. my horn headlights lights work though still. theres a black connector near my engine harness that is unplugged. i have no idea where it came from but it has 4 or wires on it. could this be the reason? i can take a pic if it helps.

any help would be awesome, thanks in advance

ps: yes ived searched
Reply
Old Nov 9, 2007 | 02:45 PM
  #2  
SLOASFK's Avatar
Top's always down
iTrader: (5)
 
Joined: Dec 2005
Posts: 4,841
Likes: 2
From: Spain
have you tried charging your battery?
Reply
Old Nov 9, 2007 | 02:46 PM
  #3  
7_7's Avatar
7_7
Thread Starter
Full Member
iTrader: (1)
 
Joined: Oct 2007
Posts: 50
Likes: 0
From: ca
Originally Posted by SLOASFK
have you tried charging your battery?
fully charged
Reply
Old Nov 10, 2007 | 10:32 AM
  #4  
7_7's Avatar
7_7
Thread Starter
Full Member
iTrader: (1)
 
Joined: Oct 2007
Posts: 50
Likes: 0
From: ca
anyone?
Reply
Old Nov 10, 2007 | 10:42 AM
  #5  
BenjiRX-7's Avatar
Senior Member
Tenured Member 05 Years
iTrader: (3)
 
Joined: Aug 2007
Posts: 383
Likes: 0
From: Monteral, QC
have you plugged your battry?

do your other electronic accessories work? lights? radio?
Reply
Old Nov 10, 2007 | 10:42 AM
  #6  
Fd3BOOST's Avatar
Recovering Milkaholic
iTrader: (7)
 
Joined: Jan 2002
Posts: 8,206
Likes: 0
From: Budds Creek, Maryland
Main 120 fuse.
Reply
Old Nov 11, 2007 | 05:22 PM
  #7  
7_7's Avatar
7_7
Thread Starter
Full Member
iTrader: (1)
 
Joined: Oct 2007
Posts: 50
Likes: 0
From: ca
yes headlight work and radio

checked the main 120 fuse- good
Reply
Old Nov 11, 2007 | 05:41 PM
  #8  
gmanuser's Avatar
wheres my calculus book?
Tenured Member 05 Years
 
Joined: Jan 2006
Posts: 276
Likes: 0
From: st. george UT
qustions
1- what was the turbo you are currently using
2- are you using an intercooler
3- could you possibly put up some pictures of where you found it and the connector itself (thier is alot of black bonnectors on the rx-7)
4- I know this sounds dumb but is your starter and starter wires all hooked up
5- check all your fuses and make sure none are out or burned
Reply
Old Nov 11, 2007 | 08:54 PM
  #9  
7_7's Avatar
7_7
Thread Starter
Full Member
iTrader: (1)
 
Joined: Oct 2007
Posts: 50
Likes: 0
From: ca
Originally Posted by gmanuser
qustions
1- what was the turbo you are currently using
2- are you using an intercooler
3- could you possibly put up some pictures of where you found it and the connector itself (thier is alot of black bonnectors on the rx-7)
4- I know this sounds dumb but is your starter and starter wires all hooked up
5- check all your fuses and make sure none are out or burned
1. aspec gt35r
2. vmount
3.will get pics in the morning
4. starter is good to go
5.will do that again tomorrow

thanks for all the help guys
Reply
Old Nov 11, 2007 | 09:40 PM
  #10  
Trexthe3rd's Avatar
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Mar 2001
Posts: 1,283
Likes: 4
From: ATL, GA U.S.
From what you are describing, the starter isn't even turning. If the engine isn't even turning how do you know the starter is good?
Check an see if the starter is getting juice when you turn the key (you will need a friend for this). If not, trace back along the main power line from the starter.
Reply
Old Nov 12, 2007 | 09:31 AM
  #11  
7_7's Avatar
7_7
Thread Starter
Full Member
iTrader: (1)
 
Joined: Oct 2007
Posts: 50
Likes: 0
From: ca
Originally Posted by Trexthe3rd
From what you are describing, the starter isn't even turning. If the engine isn't even turning how do you know the starter is good?
Check an see if the starter is getting juice when you turn the key (you will need a friend for this). If not, trace back along the main power line from the starter.
starter is good since the car started before i exchange the old motor for a reman

still a lil early in socal but im off today and i will check everything again today

im sure its just one of the fuses
Reply
Old Nov 12, 2007 | 09:36 AM
  #12  
4CN A1R's Avatar
sleeper
iTrader: (6)
 
Joined: Oct 2007
Posts: 1,957
Likes: 3
From: Abbottstown, PA
i had this problem before with the cluster. it turned out to be a short or a wire not making contact behind my head-unit.

i have no idea wats going on with it not cranking? does sound like it should be a battery problem, i'm surprised its not. i'd take it to a specialist, it prob is an easy fix...maybe something your missing?

Last edited by 4CN A1R; Nov 12, 2007 at 09:42 AM.
Reply
Old Nov 12, 2007 | 11:31 AM
  #13  
7_7's Avatar
7_7
Thread Starter
Full Member
iTrader: (1)
 
Joined: Oct 2007
Posts: 50
Likes: 0
From: ca
heres the black plug near the ecu , i remeber on my last 94 there was a black box and this one is missing it. can anyone verify and if thats why i have this problem>?

gotta look over everything again and will post an update
Attached Thumbnails no cluster lights no crank after going single-dsc06603.jpg  
Reply
Old Nov 12, 2007 | 09:42 PM
  #14  
7_7's Avatar
7_7
Thread Starter
Full Member
iTrader: (1)
 
Joined: Oct 2007
Posts: 50
Likes: 0
From: ca
Update!!!

a buddy of mine from my shop came by and took a look, hes a lil wiz at electrical sh*it so guess what now it cranks. it was the freakin alarm and getto fab wiring from the previous owner

i wasnt getting any fuel pressure so i decided not to start the car

i will let ya guys know what happens tomorrow but now it looks very promising

thanks again for all the help and pms
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
sherff
Adaptronic Engine Mgmt - AUS
9
Feb 24, 2019 12:09 PM
R7rexy
3rd Generation Specific (1993-2002)
19
Sep 2, 2015 10:24 AM
Snook
3rd Generation Specific (1993-2002)
8
Aug 26, 2015 03:40 PM




All times are GMT -5. The time now is 01:58 PM.