Cup Cake Killa

Hey Yall got a few questions. I just baught a 93 RX7 it was saposidly in working condition when i baught it but after it was delivered it didnt run. . . so i finally got it running but it sounds horrible. I am Running VERY VERY rich and cant seem to push my throttle more than half way befor the car seems to get really choppy and wont go any faster. Also its idle is REALLY low! it just wants to die i was told to check my temp and map silinoid? i was trying to locate them without tearing the car appart to much hehe but i was wondering if anyone can point me in the right direction and tell me if they have any idea how to get this wonderful car running properly again! any info would be appreciated so hit me up and thanks!!!!

dgeesaman

iTrader: (7)

https://www.rx7club.com/showthread.p...sensor+picture

If that's plugged in, then you probably have a blown engine. Honestly, you totally picked the wrong car to have shipped in sight unseen. Not sure where the nearest rotary shop is to you, but at least your Mazda dealer can run a compression test.

Dave

Sgtblue

iTrader: (16)

Just to clarify, the map sensor might be plugged in but it should also have a single vacuum line running to it as pictured in the link above.
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/faq-3rd-gen-other-useful-links-68640/
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/94-fsms-available-download-449950/
Lot of info. Good luck.