New harness, cant find a match for my knock sensor!
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2004
Location: seattle area
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
New harness, cant find a match for my knock sensor!
Put a new harness in with a rebuild I just finished and cannot find a matching connection for my knock sensor. Anyone know if they changed the connector configuration at some point?
Thanks,
Chuck
Thanks,
Chuck
#3
Sharp Claws
iTrader: (30)
never seen a harness with a variant connector. the knock sensor connector sits right behind the ear on the front iron for the engine hoist hook behind the alternator. sometimes it gets buried underneath the harness when laid on the engine or broken off on brittle harnesses.
the power steering load sensor and O2 sensor connectors are the same as the knock sensor, FYI.
the power steering load sensor and O2 sensor connectors are the same as the knock sensor, FYI.
Last edited by RotaryEvolution; 07-04-12 at 01:09 AM.
#4
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2004
Location: seattle area
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
never seen a harness with a variant connector. the knock sensor connector sits right behind the ear on the front iron for the engine hoist hook behind the alternator. sometimes it gets buried underneath the harness when laid on the engine or broken off on brittle harnesses.
the power steering load sensor and O2 sensor connectors are the same as the knock sensor, FYI.
the power steering load sensor and O2 sensor connectors are the same as the knock sensor, FYI.
Thanks,
Chuck
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
stickmantijuana
MoTeC
5
09-10-15 07:58 PM
befarrer
Microtech
3
08-22-15 05:52 PM