Need some help with fuel pump #
11-30-05, 07:23 AM
#1
?????????????
Thread Starter
Join Date: Sep 2003
Location: Greece
Posts: 512
Likes: 0
Received 0 Likes
on
0 Posts
Need some help with fuel pump #
I am in the middle of installing a new fuel pump(DENSO OEM),and the serial number are diffeent.The old pump # is 195130-0782 and the new has 195130-1270 .Can anyone verify that its the same pump?I checked the http://www.densoaftermarket.com/cata...ZDA&model=RX-7
but its no help(dimensions etc are the same).
Regards,
Stathis
but its no help(dimensions etc are the same).
Regards,
Stathis
11-30-05, 10:55 AM
#2
This isn't a concrete answer, but it looks like the model number 195310 is the same on both, and the 0782 or 1270 indicates a revision or manufacturing run. If the rest of the fuel pump looks functionally identical, I would be comfortable installing the new one.
Dave
Dave
11-30-05, 12:11 PM
#3
?????????????
Thread Starter
Join Date: Sep 2003
Location: Greece
Posts: 512
Likes: 0
Received 0 Likes
on
0 Posts
Dave,thanks for the reply.I've installed the pump,and tested it.
I get:
At idle 30 psi = ok
Pressure with the F/P (fuel pump) and GND (ground) diagnosis terminals 36 Psi = ok
Maximum fuel pressure (71-107 psi) by plugging the fuel line on the engine side i get 50 psi = NOT OK?
I get:
At idle 30 psi = ok
Pressure with the F/P (fuel pump) and GND (ground) diagnosis terminals 36 Psi = ok
Maximum fuel pressure (71-107 psi) by plugging the fuel line on the engine side i get 50 psi = NOT OK?
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
ChrisRX8PR
Single Turbo RX-7's
21
10-18-15 04:01 PM
