3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Need some advice about some turbos

Thread Tools
 
Search this Thread
 
Old 07-07-05, 10:51 PM
  #1  
accepting donations

Thread Starter
 
pearlyellow's Avatar
 
Join Date: Jan 2004
Location: Omaha, NE
Posts: 408
Likes: 0
Received 0 Likes on 0 Posts
Need some advice about some turbos

Here's the deal. The only problem w/ my car since I bought it has been the turbos. The turbos on the car have always been fine, sounded good & boosted good just leaked hella oil into the manifold. Ok fine, so I buy a used set that as fate would have it were shot. Nice waste of money. Had them rebuilt and I'm getting all kinds of noizes after installing them. Every time I track one down I get a new one. Some I can't even find, it's as if they're coming from inside the damn turbos. I've got rediculous exhaust leaks and I've doubled the gaskets thinking that would help. Not to mention the fact that they are leaking oil from the seals straight onto the exterior manifold. Nice rebuild job. Anyway, I'm tired of taking them off, putting them back on, taking them off, etc. What I want to know is what a good single setup to have is and what is involved w/ installing. What I mean is what other things am I going to have to get besides the single turbo kit? I am just so tired of the problems w/ these twins. Am I going the right route, I am just so frusterated right now. Any advice would be appreciated.

Last edited by pearlyellow; 07-07-05 at 10:54 PM.
Old 07-07-05, 11:52 PM
  #2  
Rotary Freak

iTrader: (8)
 
Cgotto6's Avatar
 
Join Date: Nov 2003
Location: Bothell, Washington
Posts: 1,893
Received 2 Likes on 2 Posts
You would need some sort of programable ECU, such as the ever so popular PFC+Commander. Then you would need to get some more fuel to the engine...Injectors, fuel pump..etc...You would need a new dp for sure, im not sure bout the midpipe though....

Thats just my thinkings on the subject, I dont have a single, this is all just what I have gathered from reading...

If your not ready to give up the streetability of the twins why not get the BNR State 3's? Goodfella swears by them...
Old 07-08-05, 12:07 AM
  #3  
Lives on the Forum

 
rynberg's Avatar
 
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes on 8 Posts
If you're happy with the car, brand new 99-spec twins are about $2500. Much, much cheaper than going single. If both sets of turbos were dumping oil, I would suspect maybe there's another issue at play than just bad turbos...

BNR's are $2350 but you must supply Bryan with a good core set of turbos, which means no badly cracked hotsides (Bryan may have a good core you could buy). I just got my BNRs Tuesday...
Old 07-08-05, 07:29 PM
  #4  
accepting donations

Thread Starter
 
pearlyellow's Avatar
 
Join Date: Jan 2004
Location: Omaha, NE
Posts: 408
Likes: 0
Received 0 Likes on 0 Posts
What I really need is someone who knows there **** to come do this for me, lol
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
New Member RX-7 Technical
9
03-18-18 11:08 PM
stickmantijuana
Engine Management Forum
11
11-09-15 01:15 PM
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM
stickmantijuana
20B Forum
10
08-19-15 01:47 PM
tridav3
3rd Generation Specific (1993-2002)
6
08-17-15 06:32 PM



Quick Reply: Need some advice about some turbos



All times are GMT -5. The time now is 07:53 PM.