Can someone provide me with pics of the screw or screws that hold the Fender liner ("Splash Guard") in place. Is it one type of screw, or are two different ones used to hold the Splash Guard in place? Your help would be appreciated.

Sarge

 

2 different ones. they came with the splash guards. they also came with the appropriate sized backings which snapped into the square holes under the fenders. I'd take pics but the heads all look the same and I sealed them into the fenders with antirust sealant.

 

Two different types as mentioned. Mine were all rusted out, and they all broke off when I took the splash guard off to fix the leak around my oil pan.

I just replaced them with M6 (10 mm) stainless flange bolts , a washer on each side, and a crush nut. Works just fine, and I won't ever have to worry about them rusting out again.

The whole thing cost me about $10.

 

ttt

 

KEYNOTE22,

I'm expecting a delivery today for the driver's side splash guards. I did not know if they were sending the screws with it. I hope they are. I believe I have the original screws, but its been so long I wanted to make sure. If they are not in the box or if I can't find the right ones, I will take WINGSFAN suggestion.

Sarge

 

From my parts car again. Two different types of screws, the plastic type are all along the inside and top. The metal screws hold the outer edges on along with the plastic type.

Hope this helps.

Jeff[IMG]http://[/IMG]

 

Another one.[IMG]http://[/IMG]

 

Turbojeff,

Thanks once again,

Sarge