hey guys.... having a real big problem with a fuel leak and stuff... some time this week ill yank the manifold and chek the injectors.... sec. inj. are 1300, and i bought the car this way... i just wanna make sure there not reversed or that they put the stock secondaries as primaries.... so if anyone has a pic of the stock injectors that would help me a lot... i know to replace the o rings when i check the injectors but what the hell is a crommet???...

 

^

 

Check to make sure there's an o-ring in there too, and that it's not cracked. That could cause a fuel leak, especially with a higher-powered injector.

 

http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMESSO%3AIT

There are a couple of pics on there. The red ones are the secondaries. The pics will only be there for a couple more days.

 

awesome! thanx for the help... appreciate it

 

850's ==>

the taller ones are 550's and stock have a brownish connector cap.


(secondary rail is on the LIM, and the Primarys feed into the housing)

 

how about 1300cc??? anyone have a pic?

 

For the most part, they'll look the same as stock assuming that they are bored out 1300 injectors.