Hi I was wondering if any one has a pic of fd rx7 dash harness x14 connector so I can see pin out as well as wire color.
Thanks

 

Hey Ricardo
Why are you looking for that ?

 

Just asking because I made some research on
X-14 not much info if you can't read electrical diagram , I do believe it's related to the cluster and some other things as well and the result of my research Iead me to simply get another harness. (standard if your doing the swap)

 

I needed a pic so I can see the wire color and pin placement as the connectors wires are not long enough to see. Can the heater core be removed without removing dash.
Thanks

 

https://www.rx7club.com/3rd-generati...index*-971065/

 

Yeah but i think it is a manual harness,

 

It's in the electrical connector diagram

X-14 is there and the pin colour as well
I confirm that

 

Yeah I have the diagrams but there is a wire on the x14 connector that is extra and does not go to anything, the diagram shows there is nothing in the pin but there is and I wanted to see wire color on other side of connector to confirm what is going on.
Thanks

 

Ooo I see now, I did notice that as well

iirc the auto harness has 11wire and the standard 14

I remember that when I plug it in some wires were connected to nothing on the other side
I came to the conclusion that it must of been a automatic/standard difference (ex: auto shifter)

 

Yeah its a pain in the butt, the wires that went to x14 dash connector that no longer did anything anymore did you use them, do you by any chance have a number I can call you and ask a few questions.

 

Sure text or call at 780-604-0619