Need a New JDM engin
10-22-03, 05:54 AM
#1
Newbie
Thread Starter
Join Date: Oct 2003
Location: LA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Need a New JDM engin
Hi im new here so i hop i can get some help here..
i just got a 93 rx7 5 speed.. and im thinking about rebuild or get a JDM engin...but i dont know where should i go so please help me
i just got a 93 rx7 5 speed.. and im thinking about rebuild or get a JDM engin...but i dont know where should i go so please help me
10-22-03, 07:27 AM
#2
I am becoming...
iTrader: (1)
Join Date: Jan 2003
Location: Montgomery, AL
Posts: 1,507
Likes: 0
Received 0 Likes
on
0 Posts
ok first off why do you say you need a new engine? Have you had a compression test done? If it runs get a compression test and post your results. If they're low then you'll want to consider a rebuild. At that point it depends on what you want from the motor and what setup you'll be running. Some people will suggest getting a remanufactured motor. In that case call Malloy Mazda and get one. Other people will suggest going the route of a rebuild. I did the latter of the two but that's because of what my plans for the car were.
-Nic
-Nic
10-22-03, 10:37 AM
#4
Junior Member
Join Date: Oct 2003
Location: Phoenix Metro Area Arizona
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Also, if you gave some more info reguarding to car like how many miles are on it, boost, feel, maybe some of us here could give you a better idea of what direction to look in.
10-22-03, 07:54 PM
#5
Newbie
Thread Starter
Join Date: Oct 2003
Location: LA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Broken09
ok first off why do you say you need a new engine? Have you had a compression test done? If it runs get a compression test and post your results. If they're low then you'll want to consider a rebuild. At that point it depends on what you want from the motor and what setup you'll be running. Some people will suggest getting a remanufactured motor. In that case call Malloy Mazda and get one. Other people will suggest going the route of a rebuild. I did the latter of the two but that's because of what my plans for the car were.
-Nic
ok first off why do you say you need a new engine? Have you had a compression test done? If it runs get a compression test and post your results. If they're low then you'll want to consider a rebuild. At that point it depends on what you want from the motor and what setup you'll be running. Some people will suggest getting a remanufactured motor. In that case call Malloy Mazda and get one. Other people will suggest going the route of a rebuild. I did the latter of the two but that's because of what my plans for the car were.
-Nic
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM