I need help removing the entire airbag system, module, sensors and wiring. I'm a little confused as to what to remove and what is required for the horn to still work since the connector on the steering wheel contains both wiring. TIA.

 

Sorry, I don't know how to do it, but I am a little curious why you would want to remove the airbags.

 

I'm installing this...





which does not have an airbag. 93's have only 1 airbag (driver airbag), so I will no longer need the system.

 

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/steering-wheel-removal-efini-installation-395074/
All the orange/blue connector wires will need to be removed. Including the sensors under the hood, dash and rear bumper if you want to remove it all including the ecu.

 

I modified my clock spring to work with my Efini steering wheel...







I understand about the orange and blue connectors, but it appears some of the wiring is routed through the main wiring under the dash. I would really hate to tear into the main wiring and learn that maybe I shouldn't have.

 

Anyone?