3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Need help with this problem.... Car wont start

Old Oct 13, 2013 | 03:25 PM
  #1  
juanrotores's Avatar
Thread Starter
Junior Member
Tenured Member: 10 Years
iTrader: (1)
 
Joined: Sep 2011
Posts: 44
Likes: 0
From: pinellas park florida
FL Need help with this problem.... Car wont start

my car was starting fine so I started working on my transmission when I finish with the transmission the car didn't want to start... but the car try to start but it wont go...... also when is about to start a ball of smoke comeout of the muffler... does anybody have any suggestion..... ( the car have gas)....... CHECK THE VIDEO
......... just copy and paste
Reply
Old Oct 13, 2013 | 04:20 PM
  #2  
tabuk1!'s Avatar
Full Member
iTrader: (5)
 
Joined: Sep 2009
Posts: 154
Likes: 0
From: California
Are you smelling any fuel?
Reply
Old Oct 13, 2013 | 05:32 PM
  #3  
juanrotores's Avatar
Thread Starter
Junior Member
Tenured Member: 10 Years
iTrader: (1)
 
Joined: Sep 2011
Posts: 44
Likes: 0
From: pinellas park florida
Tomorrow I'm gonna check that
Reply
Old Oct 13, 2013 | 07:29 PM
  #4  
J-RnsxT's Avatar
Junior Member
iTrader: (1)
 
Joined: Jul 2012
Posts: 23
Likes: 0
From: San Diego
This just happened to me too! It seems that my primary injectors are not working. Changed and checked the sparks, they do fire up. The secondary injectors squirts, and the primary injectors just drips. The primary injectors are now out but I would like to know if the injectors are known for this?
Reply
Old Oct 14, 2013 | 07:14 AM
  #5  
ppritchard's Avatar
93 Touring
Tenured Member 15 Years
 
Joined: Aug 2005
Posts: 968
Likes: 4
From: Longwood FL
Try the de-flooding procedure. Works for me everytime that I get into this situation.
Reply
Old Oct 14, 2013 | 07:51 AM
  #6  
cr7684's Avatar
Rotating Performance.
Tenured Member 15 Years
iTrader: (42)
 
Joined: Jul 2005
Posts: 1,820
Likes: 0
From: Miami, FL.
Buy a can of starter fluid this will let us know if its a fuel issue, after check your grounds.
Reply
Old Oct 14, 2013 | 07:54 AM
  #7  
cr7684's Avatar
Rotating Performance.
Tenured Member 15 Years
iTrader: (42)
 
Joined: Jul 2005
Posts: 1,820
Likes: 0
From: Miami, FL.
I would pull the plugs to see if they are wet also Mark Anthony is not helping .
Reply
Old Oct 14, 2013 | 06:51 PM
  #8  
juanrotores's Avatar
Thread Starter
Junior Member
Tenured Member: 10 Years
iTrader: (1)
 
Joined: Sep 2011
Posts: 44
Likes: 0
From: pinellas park florida
My bad I know the music is too loud
Reply
Old Oct 14, 2013 | 08:30 PM
  #9  
Peruvianrx7's Avatar
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (25)
 
Joined: Sep 2003
Posts: 1,440
Likes: 0
From: Melbourne, FL
Check the harness plugs to make sure all the injector plugs are making good contact

Alex
Reply
Old Oct 14, 2013 | 10:11 PM
  #10  
juanrotores's Avatar
Thread Starter
Junior Member
Tenured Member: 10 Years
iTrader: (1)
 
Joined: Sep 2011
Posts: 44
Likes: 0
From: pinellas park florida
Thank you guys for the help,the car start already I'm glad it turned on from the first attempt. ..... the only thing I did was removing the EGI fuse and cranked 5 sec then put it back and it turned on right away....
Reply
Old Oct 14, 2013 | 10:14 PM
  #11  
Tem120's Avatar
Rotary Freak
Tenured Member 05 Years
iTrader: (5)
 
Joined: Sep 2011
Posts: 2,824
Likes: 6
From: Miami
Originally Posted by juanrotores
Thank you guys for the help,the car start already I'm glad it turned on from the first attempt. ..... the only thing I did was removing the EGI fuse and cranked 5 sec then put it back and it turned on right away....
sounds like just a bit of flooding , glad to see it wasnt anything major !
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kyo
2nd Generation Specific (1986-1992)
6
Apr 13, 2019 09:24 AM
gtcd
1st Generation Specific (1979-1985)
30
Aug 19, 2015 02:44 AM
torky007
3rd Generation Specific (1993-2002)
7
Aug 17, 2015 05:14 PM
ashleymiche
Introduce yourself
0
Aug 14, 2015 12:59 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:43 PM.