i need tips on launching an 93 fd tt. with street tires. and lots of other mods, i was wondering how everyone launch there car at the track let me know thanks

-steve

 

Try letting go at 3,000 RPM.
Then try searching as this is a topic they like to bring up a few times a month.

 

Non-sequential, I launch at 4500 rpm feathering the throttle at around 70%.

 

I tried this for the first time last night. I was wheel hopping like a mad man. If thats not good for the car the 6 or 7 miss shifts I made that redlined the engine sure arent. I need a short shifter or somthing.

 

short shifter

 

dIFFerential brace byKGparts =no wheel hop

 

i think its a must you slip the clutch out slowly..i drag raced for the first time in the FD a few weeks back and same thing wheel hop. I had trouble slipping the clutch

 

i dump my clutch at 4, get a little spin and take off. I have street tires.

 

https://www.rx7club.com/showthread.p...hreadid=246573

 

get stickier tires


see ya,

car 53

 

the way i have done it was slip the clutch,run around 14psi of tire pressure,burnout and i was launching the car at 7-8K rpm, but my clutch naturally slipped slightly cause of a rear main seal oil leak and boy did that rearend bang LoL!

 

I used to drop mine, with the stock turbos, at 3,500 rpms with a tread wear of about 250. I hopped like hell but had some good launches.

 

Don't dumb the clutch. Slip it out and keep your rpms up to at least 4k until its all the way out. When u dump it you get wheel hop.

And yes search for this, i know i told someone how to get a better launch on their freinds integra just a couple weeks ago, so look for that