Need help identifying 1300cc injectors
05-31-10, 02:50 PM
#1
Turbo Lover
Thread Starter
iTrader: (6)
Join Date: Feb 2003
Location: Cleveland
Posts: 783
Likes: 0
Received 0 Likes
on
0 Posts
Need help identifying 1300cc injectors
I'm currently working on a friends car and I'm trying to verify that the car has 1300cc secondary's.
He bought the car already modified and I'm trying to see what kind of fuel system it has. I know the primaries are stock 550's so I took one of the secondaries out and I didn't see any markings whatsoever to indicate that it was modified. Does RC always mark the injector what it has been modified? Is there anything else on the injector that would indicate that it was bored out to 1300cc's?
Thanks
(btw, I searched and couldn't find much)
He bought the car already modified and I'm trying to see what kind of fuel system it has. I know the primaries are stock 550's so I took one of the secondaries out and I didn't see any markings whatsoever to indicate that it was modified. Does RC always mark the injector what it has been modified? Is there anything else on the injector that would indicate that it was bored out to 1300cc's?
Thanks
(btw, I searched and couldn't find much)
05-31-10, 02:58 PM
#2
RX-7 Bad Ass
iTrader: (55)
The RC injectors I've seen have had 1300cc scribed on the side of the injector. You'd have to pull it out of the fuel rail to be sure.
If he has a PowerFC, it would have to be set to 1300 for the secondaries in the PFC or the car would run SUPER rich up top.
Dale
If he has a PowerFC, it would have to be set to 1300 for the secondaries in the PFC or the car would run SUPER rich up top.
Dale
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM