3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Need Help, Engine Revs High

Old Jan 11, 2002 | 11:54 AM
  #1  
IgoSlow's Avatar
Thread Starter
Senior Member
Tenured Member 15 Years
 
Joined: Nov 2001
Posts: 520
Likes: 0
From: Houston
Angry Need Help, Engine Revs High

Just put a new engine end and when I start it, the rpms keeps climbing all the way up to about 4.5. We check the tps and we are not sure if it is broken or not. when we put the tps in, it is already postioned 1/4 of the way. Anyone have a spare tps sensor they could look at for me? If you look at the inside of the sensor with the connector facing down. Mine goes lie this ( from left to right ) hole for screw, tab, tab whole for screw. it all runs strait a cross. me friend thinks the tabs should be oppisite of the screw holes, thus making a cross if drawn a line though. or if you think the tps ok please do tell me what could be causing the engine to rev so high.

Thanks

Last edited by IgoSlow; Jan 11, 2002 at 12:21 PM.
Reply
Old Jan 12, 2002 | 12:00 PM
  #2  
RexTech's Avatar
Full Member
Tenured Member 15 Years
 
Joined: Sep 2001
Posts: 156
Likes: 0
From: Caracas, Venezuela
I donīt know what is happening to your car. Normally in cold start the revs goes up to 3000 rpm.

Just for look for a difference try to star it with the 1° gear engaged and see what happend?

Do you have an engine light failure code?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
11
Nov 18, 2024 03:47 AM
C. Ludwig
Single Turbo RX-7's
49
Jan 30, 2019 06:31 AM
incubuseva
2nd Generation Specific (1986-1992)
14
Sep 3, 2015 12:37 PM
zuesskroph
2nd Generation Specific (1986-1992)
0
Aug 13, 2015 06:05 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:00 PM.