need help asap
#1
Full Member
Thread Starter
Join Date: Oct 2002
Location: hopewell junction ny
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
need help asap
Hey I am right now trying to pull the motor.
Why cant we get the motor to seperate from the tranny?
Please help
Thank you,
Craig Kacmarczyk
www.drivinhard.com
Why cant we get the motor to seperate from the tranny?
Please help
Thank you,
Craig Kacmarczyk
www.drivinhard.com
#2
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Join Date: Apr 2003
Location: Denver, NC
Posts: 3,531
Likes: 0
Received 0 Likes
on
0 Posts
Do you have all the bell-housing bolts loose/off? Also you need to seperate the clutch collar from the pressure plate to get them apart.....This is done by using a flatbladed screwdriver or equivelent and putting it in between the thrwout bearing and the collar. Push the TO bearing towards the tranny.
#4
Full Member
Thread Starter
Join Date: Oct 2002
Location: hopewell junction ny
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
I just want to say that thank god for Rx7club.com
Thank you guys for your help.. We took the six fly wheel bolts out and about 5 minutes later the motor was out...
Thanks again.
Craig K
WWW.DRIVINHARD.COM
Thank you guys for your help.. We took the six fly wheel bolts out and about 5 minutes later the motor was out...
Thanks again.
Craig K
WWW.DRIVINHARD.COM